ADR approved tank TT ADR series

fuelmobilemetal

Metallic tank, transportable type, ADR APPROVED, with UN marking and relevant labels, suitable to transport flammable fuel of CLASS II and III. Produced with carbon steel sheet Fe 360B, thickness. 2,5 mm and with available capacity from 258 to 878 lt. Metallic tank, transportable type, homologated by the Ministry of Transports and Navigation, ADR APPROVED, with UN marking and relevant labels, suitable to transport flammable fuel of CLASS II and III, carbon steel sheet Fe 360B, thickness. 2,5 mm, furnished with the following devices and protection accessories according to ADR instructions, as follow:: • Horizontal (Mod. 609-920) or vertical (Mod. 280-440) cylindrical tanks, fixed in a shock proof and anti-roll protective steel frame. • Watertight electro-welded, sandblasted and oven-baked powder coated. The coating is applied electrostatically (the powder is sprayed using an electrostatic gun) and is then cured under heat to allow it to flow and form a skin. • Equipped with internal breakwater plates (only for 620 and 910 models). • Manhole, diam. Ø 300 mm complete with gasket and tight bolted cover, 10 mm thickness. • 2” safety and emergency vent valve, homologated according to regulations. • Safety ball valve installed on the suction/drain point, equipped with a lockable lever to prevent unwanted opening. • Structural lifting lugs for balanced lifting from the top (including when tank is full). • Forklift pockets located on the bottom of the steel frame. • Bottom steel frame is configurated for floor anchoring. • The unit is ready for earthing and equipotential connection.