Unloading receiving hopper BSB 5124 HS

mobile

Particularly practical details
The buckling construction on the discharge side of the moving floor ensures an optimally dosed transition between the receiving hopper and product cleaner. The moving floor consists of two very heavy roller chains with transverse cleats mounted between them. Because the polyester-nylon cloth is mounted with excess length over the cleats, a favorable take-away effect is created. In addition, the receiving hoppers are provided with a 1,000 mm long horizontal section. This results in a larger volume and also enables problem-free reception from tipping or trucks where the pivot point of the body is not completely at the rear.

Standard equipped with

• Heavy baseframe with standard option to mount the cleaner.
• Double drive to the drive shaft of the unloading floor chains on model BSB 5124. The gear units are equipped with a direct drive, with separate engine cooling.
• The moving floor consists of 2,000 mm or 2,400 mm wide tubular profiles, covered with a polyester-nylon cloth.
• Hollow sections mounted on both sides on a rugged 4 inch heavy bottom chain.
• Floor mat with stainless steel wear plates under the side seals to extend floor life.
• Height-adjustable front panel for flexible crop input.
• Double sealing with rubber flaps to prevent spillage during input.
• Viewing grids in the side panels to monitor product level.
• Remote control with on/off push button, emergency stop and rotary knob with scale for setting unloading floor speed.
• Large wheels for easy transport of the receiving hopper.
• BLC Line Module System.

Options

• Automatic Capacity Regulation (ACR).
• Automatic chain lubrication.
• Rubber coverage at front side of the hopper towards floor level.
• Drive-in light: 2 LED units with 4 LEDs, light on continuously when the receiving hopper is switched on.
• Dosing unit DH.
• Frequency drive on dosing unit DH.
• Adjustable front-side coverage with cable clamping device, spring and cloth.
• Panels for locking the front side of the input gutter (three panels).
• Doors in side panels of the hopper (L + R) operated by hand.
• Hydraulic foldaway sideboard, up to 3 m from input.
• Cross conveyor (AFB 330-70), directly mounted behind the receiving hopper.
• Acquisition conveyor TKB, 1,300 mm in length, control box of the receiving hopper included.

Technical data (table)
Model | BSB 5120 | BSB 5124
Input width | 3.100 mm | 3.100 mm
Input height | 750 - 910 mm | 750 - 910 mm
Floor length | 5.100 mm | 5.100 mm
Floor width | 2.000 mm | 2.400 mm
Floor speed | 0,13 - 5,23 m/min. | 0,13 - 5,23 m/min.
Volume | 16,5 m³ | 17,6 m³
Capacity | 70 tons/hour | 80 tons/hour
Drive | 2.2 kW | 2 x 2.2 kW
Length (without product cleaner) | 7.350 mm | 7.350 mm
Width | 3.180 mm | 3.310 mm
Height (without bracket for ACR) | 2.800 mm | 2.800 mm

Technical specifications

• Models: BSB 5120 HS and BSB 5124 HS
• Input width: 3.100 mm
• Input height: 750 - 910 mm
• Floor length: 5.100 mm
• Floor width: 2.000 mm (BSB 5120) / 2.400 mm (BSB 5124)
• Floor speed: 0,13 - 5,23 m/min.
• Volume: 16,5 m³ (BSB 5120) / 17,6 m³ (BSB 5124)
• Capacity: 70 tons/hour (BSB 5120) / 80 tons/hour (BSB 5124)
• Drive: 2.2 kW (BSB 5120) / 2 x 2.2 kW (BSB 5124)
• Length without product cleaner: 7.350 mm
• Overall width: 3.180 mm (BSB 5120) / 3.310 mm (BSB 5124)
• Overall height (without bracket for ACR): 2.800 mm