Mechanical forestry winch V series

tractor mounted

Fransgård's winches are made and developed in close collaboration with the end user. The winch is continuously developed and updated based on the experience of the many end users worldwide. This makes the winch a highly effective and attractive product for both professional and hobby foresters. Simple design provides low cost operation and ease of use The simple and efficient design of the mechanical parts makes the winch very economical in operation and replacement of wearing parts. The winch has a very easy and simple operation, which means that a new user quickly becomes familiar with the operation of the winch. The steel wire is the most commonly used wear part. Its lifetime can be extended by using chains for mounting around the log. The sliding clutch ensures that the winch and tractor are not unnecessarily overloaded by pulls greater than the winch's capacity. Important! There must always be a load on the wire during winding, otherwise the loosely wound wire must be pulled out again before a new load is applied to it. Wire guide The wire guide on the moulded top roller box ensures that the wire is always centred on the roller while working. The wire guide also keeps the wire free of larger foreign objects, so they don't get onto the drum. Top roller The top roller of the winch is mounted in a moulded steel box and mounted on a 25 mm axle with double ball bearings. (V-3021/V-3521 however only 20 mm and has only 1 ball bearing in the roller) The top roller can rotate freely to either side so that it follows the wire during retraction. Axe holder The V-5021 have an axe holder as standard.