Tipping trailer SK 750

3-axleagriculturalsilage

For this type of vehicle: Individual vehicle construction possible Robust earth-moving tipper with flat floor sheet and underfloor cylinder, 40 km/h version, silage extensions possible Chassis: Torsion-resistant chassis made of large-volume rectangular tube 300 x 200 mm/ suspended height-adjustable drawbar for low hitch position, shaft drawbar eye with 80 mm ball head coupling/ hydraulic support foot with double acting ram, 6/2 way valve to combine support foot hydraulic rear tailgate/ heavy 100 mm diameter rocking ball bearings/ hole pattern G 140 for salvage drawbar eye at vehicle rear/ 36 t parabolic springs with trailing arms/ ALB valve for automatic braking force control/ BPW axles with automatic slack adjusters (ASA), version with two caster steering axles (front and rear) with axle pressure disks, the overhead cylinders enable a very high ground clearance INFO: For use on unpaved roads and difficult terrains, we recommend a forced steering and a pneumatic or hydraulic running gear Body: Sidewalls 5 mm, floor sheet 6 mm in one piece, material quality S355/ top frame made of rectangular tube 100 x 80 mm, body beams 200 x 100 mm/ waterproof welded middle and end stanchions/ hydraulic opening rear tailgate with automatic pressing system laterally by means of locking hooks, locking block valve with load safety valve, additional block ball valve at front to prevent unintended opening, standard with closing hook stop mode, i.e. that the closing hooks of the tailgate can be overridden by means of a claw, if necessary/ detachable aluminium access ladder at headboard/ robust rubber supports between body and chassis/