Straight compression irrigation fitting YS72 series
polypropylenegalvanized steelfemale

straight compression irrigation fitting
straight compression irrigation fitting
Add to favorites
Compare this product


polypropylene, galvanized steel
Other characteristics


Female Adaptor (Galvanized Reinforcement Ring) Pressure Values Ø 20 mm – Ø 10 mm : PN 6 Installation Areas Landscaping Systems Agricultural Irrigation – Greenhouses -Poelsan compression fittings should be kept away from hard or sharp objects during storage or installation phases. If the installation will be under the ground, it should be covered with sand in order to keep away from contact with hard and sharp objects. Damaged fittings shouldn’t be used strictly. -To be able to get the best efficiency from Poelsan compression fittings, tee and elbow pieces should be joined with 90°, other fittings should be joined with 180° to the system. The installation with different angles will make extra tensile on the fittings and will decrease the lifetime of the system. -Teflon band should be used with the threaded pieces. The band should be used enough to prevent water leakage and wrapped on the threaded part in the twisting direction. -Over twisting of the nut will cause extra tension on the adaptor. A nut, which is exposed to such an extra tension cannot provide the guaranteed pressure value. Therefore the user should remember that the material is plastic and the nut should be twisted with a force only enough to prevent leakage.


No catalogs are available for this product.

See all of POELSAN PLASTIC SAN.TIC A.S.‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.