Loader wagon RIBERI RS65
mounted2-axleforage

loader wagon
loader wagon
Add to favorites
Compare this product
 

Characteristics

Construction
self-loading
Type
mounted
Number of axles
2-axle
Application
forage
Payload
0 t...10 t
Brake system
with mechanic braking
Other characteristic
harvesting, self-unloading, with mower, moving floor, PTO, side-unloading, swing-arm
Empty weight

2,300 kg (5,070.6 lb)

Recommended power

70 ch (70 hp)

Load volume

19 m³, 24 m³ (671 ft³)

Loading case lenght

4,100 mm (161.4 in)

Loading case width

2,000 mm (78.7 in)

Loading case hight

1,650 mm (65 in)

Description

The Riberi RS 65 self-loading cutter wagon is the most compact machine of the two- axle range. The machine is fitted with a mechanical tandem axle that allows for adaptation on uneven ground; this oscillation is independent on both sides to minimize direct impacts on the frame. STRUCTURE Robust frame and drawbar in high strength steel (S355) with special attention paid to thickness, tubular section, and welds. FEM simulations to verify the structural tightness of each single component of the machine. A segmented double bogie axle system is standard. The independent oscillation on both sides minimizes the stresses on the frame. Mower on independent frame that allows free oscillation. MOWER Two-drum cutter bar with helical gear transmission that transmits more power, reducing consumption and noise. High resistance steel discs. Lightening system (on request), which drastically reduces mechanical stress on the mower / elevator unit, increases the life of the machine and provides a dynamic response to the roughness of the ground. Perfectly shaped collector plate which, thanks to the turbulence of the drums, conveys the forage directly into the loading elevator. The product never touches the ground and remains clean. LOADING SYSTEM Loading elevator with two chains equipped with forks that transport the product without damaging it. Mechanical or hydraulic elevators depending on the versions. A certain number of knives can be mounted to cut the forage and make unloading easier. UNLOADING SYSTEM Chain conveyor sliding on the loading platform, in a mechanical or hydraulic version on request. Unloading via a standard manual tailgate or a hydraulic one as an option.

Catalogs

No catalogs are available for this product.

See all of RIBERI‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.