Kverneland hydraulic mulchers

Cutting width: 125 cm - 155 cm

Brushcutter for working on embankments or slopes that is able to operate fully extended from the front position, adapting to the various angles of the ground. Made up of an extendable positioning arm that is telescopic with two sections ...

Cutting width: 144, 167 cm
Rotational speed: 540 rpm
Tractor power: 30, 35 ch

... position of 1.00 m compared to centre of the tractor. The Votex FS is also available in a FS-V version with 30 cm mechanical or hydraulic mitre adjustment option by means of parallelogram arms between the three point ...

Cutting width: 600 mm - 1,000 mm
Tractor power: 70 ch - 120 ch

... growth of weeds in orchards and olive-yards. It has an independent hydraulic tank, installed behind the tractor. The machine is available in two versions, one with an automatic hydraulic sensor wire allowing ...

Cutting width: 120 cm - 190 cm
Rotational speed: 540 rpm
Tractor power: 50 ch - 100 ch

... TS flail mower equipped with a "Pick-up" rotor is a semi-mounted machine applicable to the three points of the tractor's hydraulic lift. Thanks to the presence of the "Pick-up" rotor, it collects any pruning residues ...

Cutting width: 1,000, 1,300, 1,200, 1,400 mm
Tractor power: 15 ch - 50 ch
Weight: 285, 265, 350, 300 kg

... STEEL Mulchers designed for low-power tractors, they finely shred grass, vine shoots and pruning waste up to a maximum diameter of 3 cm. They finely shred grass, vine shoots and pruning waste up to a maximum diameter ...

Cutting width: 130 cm - 225 cm

The ecomower is ideally suited for the maintaining of rough vegetation such as at road verges. The ecomower mows the vegetation by means of a rotating rotor with ‘loose’ hung flails attached to this. Through the rapidly rotating flails, ...

Cutting width: 1.8 m - 3 m
Tractor power: 55 ch - 100 ch

• Rotor Ø from 1,80 to 2,40 m: 180 mm • Rotor Ø from 2,60 to 3,00 m: 220 mm • Number of RPM: 1850 • Three point linkage cat. 2 • Centralised greaser • Automatic belt tightener • no. 2 counter-knife • Gearbox with ...

Cutting width: 1.4, 1.6, 2 m
Rotational speed: 1,000 rpm
Tractor power: 150, 60 ch

... the most challenging conditions. Other key features are a hydraulic opening hood and an adjustable push frame which work together to ensure that material is channeled efficiently into the mulcher. The ...

Cutting width: 200, 180, 160 cm
Tractor power: 100, 90, 80, 70, 60 ch

The TLI SENIOR SE is the right machine for the large farm or contractor that needs a robust machine and able to reach every point of the ground. This version has hardened pins and bushings that provide maximum durability

Cutting width: 1,300, 1,500, 1,800, 2,000, 2,250 mm
Rotational speed: 1,000 rpm
Tractor power: 40 ch - 130 ch

... hammers for a long life and heavy work. rear door guard with hydraulic opening. Steel skig with a depth regulation. Standard equipment: Freewheel included in the group Wear plate rotor. Hydraulic ...

Cutting width: 1.4, 1.6, 1.8, 2, 2.2 m
Tractor power: 50 ch - 150 ch

... gear box. The rotation of KB Series is 90° (and 65° in case of slope). • Cutting widths 1,4/ 1,6/ 1,8/ 2,0/ 2,2m • The hydraulic sideshift • Head rotation +90˚ / -65˚ • The mechanical breakaway • Ground-roll hands ...

... protection. · Coupling to tractor Cat. I & II. · Side skids and inside rear roller. · Hydraulic discharge to the ground of the loading compartment. · Hydraulic hoses with external cover against sratches ...

Cutting width: 45, 56 in

... teeth to fit the application– reversible, beaver, concave, or carbide. Simple and easy to use, only using 3 hydraulic lines – 2 additional hydraulic lines are required for the optional rotator.

Cutting width: 1,600 mm - 2,400 mm
Tractor power: 40 ch - 120 ch

... and pruning residue, thanks to the robust structure and equipment. The machine can be moved sideways with a mechanical or hydraulic system (optional). Robust structure suitable for professional use. Maximum application ...

Cutting width: 90 cm - 240 cm
Tractor power: 30 ch - 85 ch

... cutting height. The models 140 - 160 - 180 - 200 - 225 - 240 are standard equipped with mechanical side-shift (in option hydraulic side shift), with hammers/knives, and with rear roller to adjust the cutting height.

Cutting width: 65 cm - 145 cm
Tractor power: 37 kW - 142 kW

... brushcutting-mulching industrial system to be installed on most excavators or other carriers with articulated masts. DAH brushcutter-mulchers are designed for vegetation control work.

Cutting width: 80 cm
Weight: 130 kg

... idrauliche (Mod.TS). A SINGLE ACTING or OPEN CENTRE hydraulic power system La portata e la pressione al motore idraulico, indicata nella tabella, deve essere costante. The Fow rate and pressure to the hydraulic ...

Cutting width: 303 in
Rotational speed: 1,000 rpm
Tractor power: 150 ch - 300 ch

• High capacity gearbox with large oil volume reduces heat buildup, extending bearing and gear life • Specially designed oil seal protectors prevent vines from encasing and damaging gearbox oil seals • 12.75-inch diameter flail tubes ...

Cutting width: 1,600 mm - 2,850 mm
Tractor power: 51 kW - 88 kW

... reinforced) • Hydraulic cylinders for tilt of the wires rotors • Transmission to the wires rotors by hydraulic motor • Electro-hydraulic automatic feeler with electrovalves, flow regulator, ...

Cutting width: 1.6 m
Rotational speed: 540 rpm
Tractor power: 75 ch

... 168 mm in diameter, with scraper TECHNICALS SPECIFICATIONS -Axial and lateral rear mounted assembly -Independent hydraulic circuit with cooling system -Piston pump and motor -Power: 55 hp -Cutting height adjustable ...

Cutting width: 42 in
Tractor power: 75 ch - 135 ch

... excavtor mulchers have a synchronous belt drive system eliminates belt and drive sprocket slippage and a heavy duty bent axis variable displacement piston motor that offers better performance optimization. ...

Cutting width: 0.9 m - 1.8 m
Rotational speed: 540 rpm
Tractor power: 26 ch - 60 ch

Reinforced model for tractor from 26-60 Hp The HYDRAULIC MOVABLE SHREDDER BTM is particularly suitable for mincing vine- sarments and fruit-tree pruning (even big size), for cleaning the underwood and cutting the grass. Standard ...

Cutting width: 1.25 m - 1.8 m
Tractor power: 29 kW - 66 kW
Weight: 335 kg - 582 kg

... wood in vineyards and orchards. The T2 shredder/mulching machines is available with a fixed three point hitch or with a hydraulic offset mechanism operated from the driving position The T2 can be used in combination ...

Cutting width: 1.3 m - 2 m
Tractor power: 40 ch - 80 ch

... shredder for agriculture and maintaining of green areas. It is suitable for roadsides, embankments, parks and gardens. Hydraulic inclination 90° - 70° Side parallelogram displacement Self-levelling floating system Work ...