Subsoilers

140 companies | 318 products
exhibit your products

& reach your clients in one place, all year round

Exhibit with us
5-shank sub-soiler
5-shank sub-soiler
13WBG Series

Width: 2.7, 3, 4.5 m

... to graze which in turn effects forage requirements and productivity. This is where the OPICO Sward Lifter Grassland Subsoiler can help. The Sward Lifter with its rugged construction is specifically designed to break up hard pans ...

5-shank subsoiler
5-shank subsoiler
6│DT

Width: 22'00", 15'00", 17'00", 11'00"
Working depth: 8 in - 20 in

... 6│DT Subsoil Ripper Eliminate yield-robbing, root-zone compaction, increase soil porosity and utilize deeper soil moisture and nutrients The Orthman 6|DT subsoil ripper is designed as a soil conservation tool that destroys ...

3-shank subsoiler
3-shank subsoiler
Water Digger Series

Working depth: 80, 60, 100, 120 cm

Trave 250 cm. Frame 150x150 mm. Frame 200x200 mm. Anchors distance variable. Tempered chisel. Anchor protection reversible. Rear drainage sphere.

See the other products
CMA Macchine Agricole Srl
subsoiler with gauge wheels
subsoiler with gauge wheels
SMR series

Width: 1.7, 1.9, 0.7, 1.6, 2 m
Working depth: 0.6 m

... Mec-Rul's subsoilers were developed to break the soil compactation, allowing a bigger water flow and development of the roots, easing the usage of the rotavators. ...

2-shank subsoiler
2-shank subsoiler
DVF series

... DVF/1 This subsoiler consists of a resistance monolithic high strength tubular frame of 120x120mm to which are screwed on two “Michel” type curved anchors. This configuration allows to vary the distance between the two anchors from a ...

3-point hitch subsoiler
3-point hitch subsoiler
ERS350

Width: 1,200 mm
Working depth: 30 cm

... Technical Data Model - 5 Gear - 7 Gear - 9 Gear Length (mm) - 1600 - 2100 - 2500 Height (mm) - 1275 - 1275 - 1275 Distance Between Teeth (cm) - 25 - 25 - 25 Required Power (Hp) - 50-70 - 60-80 - 80-100 Weight (kg) ...

2-shank soil loosener
2-shank soil loosener
DAR C

Width: 140, 170 cm
Working depth: 20, 70 cm

... aerated it, it breaks the compact layers, formed at different depths, due to ordinary work. It differs from traditional subsoilers because it lifts the soil evenly, thanks to the curved anchors that do not damage the turf. In addition, ...

See the other products
Agrofer SRL
5-shank subsoiler
5-shank subsoiler

Working depth: 30 cm

Available in 5 or 7 teeth configurations, the bed decompactor works in-depth (approximately 30 cm). It breaks up the hard undersoil to allow water to infiltrate and ensure better soil ventilation.

ripper
ripper
XR Series

Width: 76, 84 in
Working depth: 20 in

... The new XR Ripper is now available from CL Fab in two widths: 76″ and 84″. It is built for compact track loaders and skid steers and can handle the power of the biggest skid steers and compact track loaders. With the XR Ripper ...

11-shank subsoiler
11-shank subsoiler
AKER

Width: 1 m - 5.6 m
Working depth: 450, 600, 550, 650 mm

Gascón has got a wide range of models from 1 to 11 shanks, of different structures, each of them very strong.

See the other products
GASCON INTERNATIONAL
5-shank subsoiler
5-shank subsoiler
ASA LASER LINE

Width: 2 m - 3.57 m
Working depth: 30 cm - 62 cm

... Asa Laser subsoiler soil operations are vibrating. This feature increases soil decompaction between the crop rows and reduces the required power of up to 10% in relation to other subsoiler equipment. Soil decompaction ...

2-shank soil loosener
2-shank soil loosener
HELISOL

See the other products
Ferrand
5-shank subsoiler
5-shank subsoiler
SR series

Width: 54, 66, 78, 90 in

... A cultivator is a farm implement for stirring and pulverizing the soil,either before planting or to remove weeds and to aerate and loosen the soil after the crop has begun to grow. It is powered by a tractor and stirs the soil.usually to a greater ...

See the other products
Hangzhou SanSen Hardware Machinery Co.,Ltd
5-shank subsoiler
5-shank subsoiler
ATLAS series

Width: 2.5 m - 3.5 m
Working depth: 0 cm - 50 cm

... and impacts. The safety bolt shear resistance of the tines during driving is 650 kg. Safety Bolt for Tines The Atlas Subsoiler offers uninterrupted driving with a load of up to 650 kg. To prevent the robust tines from being damaged ...

See the other products
Ilgi Tarim Makineleri San. ve Tic. Ltd. Sti.
3-shank subsoiler
3-shank subsoiler
JMA300

Width: 3 m
Working depth: 55 cm

... The Agricultural tillage machinery are Rotary Tiller、Reversible Plow、Disc Harrow、DiscPlow、Hole Digger、 Subsoiler etc. Subsoiling Shovel Qty. - 7 Operation speed - 6-10km/h Power Required - 150~200HP Weight - 1928kg ...

6-shank ripper
6-shank ripper
ROTORIPPER

Working depth: 15, 40 cm

... working deep into stony or particularly compact soils, our rotary subsoiler has this peculiarity. The work of the rotary subsoiler is almost comparable to that of a traditional ripper at a working ...

5-shank subsoiler
5-shank subsoiler
T-REX

Width: 2.4, 2.9 m

... With increased light frame equipped with a manual circuit loading pump. -HYDROPNEUMATIC -INCREASED LIGHT FRAME ...

See the other products
Gruppo Rapisarda Ubaldi
3-shank subsoiler
3-shank subsoiler
KRET series

Width: 0.8, 1.2, 1.8, 2.4, 3 m

... Subsoiler KRET is designed for deep soil loosening and working with him rake rozgrabia and aligns uplifted surface of the soil, which reduces water evaporation from the soil and accelerates the germination of seeds at harvest. Subsoiler ...

5-shank subsoiler
5-shank subsoiler
GZ Series

Width: 2 m - 5 m

... Specifications - two rows of tines with regulated spacing between the tines: from 400mm to 1000mm. - work width 2 and 3 tine width up to 2,4m - work width 4 and 5 tine width up to 3m - No. of tines: from 2 to 5 - 900mm clearance under the frame - rear ...

5-shank subsoiler
5-shank subsoiler
RIP Series

Width: 200, 250, 360 cm
Working depth: 60 cm - 80 cm

... - Pair of wheels depth-adjustable support - Mechanical system for side blades Reentry (only for RIP.7) - Hydraulic system for side blades Reentry (only for RIP.7) ...

5-shank subsoiler
5-shank subsoiler
PEGAZ EVO

Width: 3 m

... The PEGAZ EVO subsoiler is an agricultural tool used for crushing, airing the soil and deep (400 to 600mm) loosening of the subsoil in order to improve its physical and biological properties. This agrotechnical effect is mainly achieved ...

11-shank subsoiler
11-shank subsoiler
AST-MATIC 450

Width: 4,400, 5,200, 6,000 mm
Working depth: 450 mm

... The AST-MATIC is a robustly designed and constructed trailing Deep Ripper that has the ability to penetrate & breakup highly compacted soils. Featuring a rear crumble roller to ensure a smooth, level finish & optional spring loaded front ...

See the other products
serafinmachinery
1-shank sub-soiler
1-shank sub-soiler

... reaching. To know more about SubSoilers Click Here. We are a pioneer in the manufacturing of excellent quality SubSoiler machines at an affordable price with these Special Features : Special Features •KS GROUP’s Sub ...

5-shank subsoiler
5-shank subsoiler
RAMBO MINI

Width: 1.4 m - 2.7 m
Working depth: 0.2 m - 0.5 m

... The subsoiler CLD/ RAMBO MINI is produced to work with tractors from 45 to 110 HP. Its versatility allows to work also in greenhouses with tracked tractors and on hilly soils. Using CLD/ RAMBO MINI can be obtained exceptional energy conservation, ...

See the other products
Badalini Srl
5-shank sub-soiler
5-shank sub-soiler
HERCULES

Width: 2,500 mm - 3,650 mm
Working depth: 550 mm - 550 mm

... •Rips the compact layer formed in the deep part of the soil •Used at depths starting from 40 cm •Loosening the hardest soil layer to allow water permeability •Used in the removal of tree roots in places that turn into agricultural land Advantages: •Thanks ...

exhibit your products

& reach your clients in one place, all year round

Exhibit with us
AgriExpo RFQ: Free quotation comparison tool
Receive and compare quotations for free
Describe your project
We select
the best suppliers
Compare quotations and complete your purchase