Working width: 700 mm
Working depth: 2,200 mm
The scarifier RP700 is a tool characterized by a robust frame upon which working bodies consisting of vertical anchors with pointed plowshares and interchangeable steel knives are fixed. The anchors arranged on a straight frame have the ...
Working width: 50 cm
Working depth: 30 cm
The ripper is the perfect tool to break-up hard packed ground, removing roots and buried stones. The ripper tines are 30 cm (12 in) long for deep surface penetration. FEATURES & BENEFITS Rugged construction Simple ...
Working width: 1.2, 1.5, 1.7, 2.2 m
... - TCS 15x550 with about 2 blades/m allow soil loosening by creation of a wave up to 25 cm of depth. - TCS 20x590 with about 3 blades/m allow a vertical cracking of soil up to 25 cm of depth. In all of case these two ...
Working width: 1.2, 1.5, 1.7, 2.2 m
The Cultivigne is a solo soil loosener specially developed for vineyard. The single beam 120x120mm frame is equipped with a roller which ensures a good soil pressing and the control of the working depth. Cultivigne ...
Working width: 2.29 m - 6.86 m
Working depth: 0 in - 16 in
Minimum Till Ripper Variety of working widths available Mainframe extensions Setback brackets for staggered standard pattern 3/4-in. straight shear-bolt standard minimizes soil and residue disturbance
Working width: 130 cm - 300 cm
Working depth: 45 cm
... characterized by a maximum working depth of 45 cm. PINOCCHIO is available in different widths and shank number (from 3 to 7), just right for small or medium farms. The shanks are equipped ...
Working width: 100 cm - 225 cm
Working depth: 65 cm
... yield losses. To prevent this from happening, targeted subsoil loosening is particularly important. The reliable Labrador subsoiler is ideal for loosening tramlines and breaking up compacted soils. - Two or ...
Working width: 150 cm - 420 cm
The most sold subsoiler in Europe. Frame clearance of 83 cm. For tractors of 55 till 200 HP. Standard cat. 3L three point linkage. 3 Types of tines (ST, K and KG - thickness 30mm), ...
Working width: 500 mm
Working depth: 300 mm
The ripper is an inexpensive and practically irreplaceable tool in ground works. With the ripper it is easy and effortless to remove roots as well as rocks even from hard packed ground. The replaceable ...
Working width: 3 m - 4.5 m
Working depth: 50 cm
The benefits of selective soil loosening should never be underestimated, particularly following a wet autumn. Healthy root growth is essential if crop yields are to remain high. Any subsurface pans must be identified and then removed. Incorporating ...
Working width: 2.3 m - 6.9 m
Working depth: 508 mm
The Brillion Zone Commander is a compaction management tool designed to address soil compaction issues within the growth profile in a controlled manner in a defined area. Designed from the ground up to meet the requirements of compaction ...
Working width: 200 cm
Working depth: 450 mm
The clamp attachment of the working units enables a quick change of their working width according to immediate needs. Also equipping with the de-clodding roller is optional - any other type of roller besides a fan roller can be used.
Working width: 360, 550, 1,100 mm
Working depth: 400 mm
Horticultural subsoiler with 400 mm working depth ■ Subsoiler suitable for horticultural purposes ■ Maximal free space in the frame ■ Outer tines are mounted with bolths and in width adjustable ...
Working width: 150 cm
Working depth: 20 cm
Soil loosener 3 tines for mini tractors 3 point linkage n°1 Width : 150 cm 3 removable tines on detachable flanges Working depth : 20 cm recommended power : 17 ...
Working width: 1,840, 2,440, 3,040 mm
Advantages Longer growth season Better drainage Eliminates compaction Oxygenates grass roots Increases yield Features: Strong adjustable discs Strong hydraulic auto reset legs (to a height of 15”) Replaceable shins and toes Adjustable ...
Working width: 1.4 m - 2.7 m
Working depth: 0.2 m - 0.5 m
The subsoiler CLD/ RAMBO MINI is produced to work with tractors from 45 to 110 HP. Its versatility allows to work also in greenhouses with tracked tractors and on hilly soils. Using CLD/ RAMBO MINI can be obtained exceptional ...
Working width: 1.4, 2.4, 3.2, 4.2, 5.6 m
Working depth: 450, 600 mm
... The elasticity of shanks allows overcome obstacles. The inclination of shanks and points is the ideal to prevent the dragging of stones on the surface and obtain an amazing penetration with the least ...
Working width: 70, 950, 1,850 mm
Working depth: 610 mm
Landforce Sub Soiler is a tractor mounted implement used to loosen and break up soil at depths below the level of a traditional disk harrow or rototiller. Benefits Landforce Sub Soiler is a farming ...
Working width: 660, 1,220, 1,520 mm
... increases soil turn over by reaching deeper organic matter layers. Adjustable depth & width of ploughing available for 2 & 3 arm sub - soiler. Depth can be adjusted by top links. Heavy duty crumbler frame with SKF Bearings.
Working width: 1,100 mm - 3,300 mm
Working depth: 550 mm - 750 mm
The primary soil tillage machine is mounted from tractor's hydraulic lifting unit and universal three point linkage system.Therefore transportation to the field can be easily done.Hard ground is composed under 25-40 cm depth below the ...
Working depth: 80, 60, 100, 120 cm
Trave 250 cm. Frame 150x150 mm. Frame 200x200 mm. Anchors distance variable. Tempered chisel. Anchor protection reversible. Rear drainage sphere.
Working width: 1.75 m
Working depth: 55 cm
Precision drainage Loosens the subsoil of cultivated areas, to favour the filtration of water and the development of the roots. Minimal alteration of the surface, minimum tillage. Maximum respect for the environment. Safety fuses prevent ...
Working width: 1 m - 3 m
These subsoilers are designed for deep soil opening without opening its layer. They enable better moistening and and drainage in the surface layer of the soil. Available roller (MGW) provides better working depth control, ...
Working width: 200, 250, 360 cm
Working depth: 60 cm - 80 cm
- Pair of wheels depth-adjustable support - Mechanical system for side blades Reentry (only for RIP.7) - Hydraulic system for side blades Reentry (only for RIP.7)
Working depth: 65 cm
Working width: 35 in - 204.72 in
... As a result it provides oxygen to the earth. The shanks can be located at any distance between them. Two parallel bars design reduces the use of power. The main frame has two bodies that permit shanks ...