Field cultivators

Working width: 6.8 m - 18.3 m

Look to the Tiger-Mate 255 for the durability and Agronomic Design™ features you need to create a high-efficiency seedbed for more efficient planting and maximum yield.

Working width: 5.63 m - 18.44 m

The Case IH Tiger-Mate® 200 field cultivator creates a firm, level seedbed that provides an optimum growing environment.

Working width: 2.2, 2.6, 3 m
Working depth: 85 cm

AKPIL is a family company located in Pilzno and established by Kazimierz Anioł in 1975. The company initially specialised in the craft production of construction products. In 1985, while seeking new areas for growth in order to cope with ...

Working width: 2.5, 3, 3.5 m
Working depth: 90 cm

AKPIL is a family company located in Pilzno and established by Kazimierz Anioł in 1975. The company initially specialised in the craft production of construction products. In 1985, while seeking new areas for growth in order to cope with ...

Working width: 2.1, 2.5, 2.8, 3 m
Working depth: 15 cm

AKPIL is a family company located in Pilzno and established by Kazimierz Anioł in 1975. The company initially specialised in the craft production of construction products. In 1985, while seeking new areas for growth in order to cope with ...

The cultivator mod.MD is suitable for working terrain as a primary working after autumn winter cereal, grass, chard or consenting a good mix of crop residue with the terrain, and their burial at a depth not superior to ...

The cultivator mod.MD is suitable for working terrain as a primary working after autumn winter cereal, grass, chard or consenting a good mix of crop residue with the terrain, and their burial at a depth not superior to ...

The Discn Harrow made of a series of smooth discs suitable for minimal working, shredding stubble and furthermore on terrain characterized by a certain clumpiness allows to obtain a relevant grade of refining.

Working width: 3,000 mm

This cultivator has been specially designed for use in the front of the tractor to allow full-field cultivation and planting/sowing in a single pass. This saves both labour hours and fuel. Options include ...

Working width: 1,500, 7,150 mm

The Struik RF rigid-tine rotary cultivator can be used as either a full-field or row cultivator. The full-field configuration is prefect for planting bed preparation ...

Working width: 1,500 mm - 7,150 mm

The Struik RF rigid-tine full-field cultivator can be used as either a full-field or row cultivator. The full-field configuration is prefect for planting ...

Working width: 3,360, 1,400 mm

... power. Blocking valve that allows fixation of the width measurement of the cultivator. Interlayed blades. Allows no accumulation of grass in the arms of the cultivator. Joint bolts treated allowing ...

Working width: 1,400 mm - 2,860 mm

... fixation of the width measurement of the cultivator. Joint bolts treated allowing greater durability and prevent premature wear. Interlayed blades. Allows no accumulation of grass in the arms of the cultivator. Manufacturing ...

Working depth: 20 cm

We get a very flexible result on the field, because this machine combines two cultivation units in one. They also work independent from each other if needed. This is giving You flexibility in all kinds of conditions. The ...

Working width: 3, 4 m

... of the working depth of the curved blades or anchors • Hydraulic lifter between front equiment with curved blades and disk harrow (so that the 2 machines can be independent and short)

Working width: 2.5, 2.8, 3, 4.1 m

Chisels with curved blades - Cage roller m. 2.55 Ø 460/600 - Cage roller m. 3.00 Ø 460/600 - Cage roller m. 3.20 Ø 460/600 - Cage roller m. 4.50 Ø 460/600 - Double row of corrugated disks m. 2.55 - Double row of corrugated disks ...

chisel with n° 3 rows of blades tipo Michel + row of corrugated disks + ring roller

Working width: 18'00", 20'00", 22'06", 25'00", 30'00"

The 812 Trailing Maxitill is designed for greater trash clearance. From the massive main beam that runs throughout the frame to the 65x65x6 box section, the 812 is built tough for New Zealand conditions. Floating contour wings allow ...

Working width: 18'00" ft - 33'00"

The 103 fully trailing maxi till has "no equal" to its sound, rugged construction, 100mm tine spacing and correct placement of componentry, giving maximum strength at stress points. It's floating contour following wings allow for complete ...

Working width: 4.26, 4.87, 5.5, 6.1 m

The 203 Centre Fold provides a choice of four models between sizes 4.26m to 6.1m. The independent contour following wings ensure undulation ground is covered. The vigorous vibrating action of the world famous 'S' tine makes a highly ...

Veda Farming Equipment Inter Row Cultivator Each rolling star is mounted on double bearings with dust covers. Each five-star rolling unit oscillates in the direction on the tractor and follows the contour of the soil ...

Working width: 2.25 m - 7 m

STANDARD FEATURES Frame in square tube of structural steel 80x80x8mm. 30×30 arms mm with mechanical spring safety system and nylon rings. Sweep shares. Working depth: 18-25 cm Categorie II & III hitching. For models with manual ...

Working width: 2.5 m - 7.5 m

STANDARD FEATURES Frame in square tube of structural steel 80x80x8mm. 30×30 arms mm with mechanical spring safety system and nylon rings. Sweep shares. Working depth: 18-25 cm Categorie II & III hitching. For models with manual ...

Working width: 1 m - 2.5 m

STANDARD FEATURES CH-5-V model: fixed frame. CH-7-VE, CH-7-VE-R and CH-9-VE models: frame can be manually extended. CH-9-PH-VE et CH-11-PH-VE: frame can be hydraulically extended. Spacing between tines on all models but CH-7-VE-R ...

Working width: 2.25 m - 5.25 m

Cultichisel 2 rows (horizontal folding) STANDARD EQUIPMENT -Frame in square tube of structural steel 80 x 80 x 8 mm. -Arms of 30 x 30 mm and height of 400 mm. -Coupling with standard bolt. -Sweep shares. -Distance between arms: ...

Working width: 5.75, 6.25, 6.5, 7 m
Working depth: 18 cm - 25 cm

Cultichisel 2 rows (vertical folding) STANDARD EQUIPMENT •Frame in square tube of structural steel 80 x 80 x 8 mm. •Arms of 30 x 30 mm •Coupling: Category II and III •Sweep shares. •Distance between rows: 78 cm. •Ground clearance ...

Working width: 3.25, 4, 4.75 m

Cultichisel 3 rows (horizontal folding) STANDARD EQUIPMENT •Frame in square tube of structural steel 80 x 80 x 8 mm. •Arms of 30 x 30 mm and height of 400 mm. •Coupling with standard bolt. •Sweep shares. •Distance between arms: ...

Working width: 2,500, 3,100, 3,000 mm

Cultivators Hisarlar Cultivator is a soil tillage machine to make primary tillage for deep tillaging to eliminate the weeds via mixing organic and inorganic fertilizers to improve organic level of ...

Working width: 1,150 mm - 5,250 mm
Working depth: 25 cm

Machines made for medium and high-power tractors Our CHL chisel is a robust and reliable machine. With this type of machine we can work the soil to a depth of around 25 cm, perfectly working the stubble, thus breaking up the surface layer ...

Working width: 2,000, 3,500, 5,000, 6,000 mm
Working depth: 250 mm

Machines made for medium and high-power tractors. Our CHM chisel is a versatile machine, by adjusting the working depth we achieve different results. This tool is suitable for minimum tillage. At the first setting, we can perform semi-chisel ...

Working width: 1,400 mm - 5,850 mm
Working depth: 60 cm - 200 cm

Machine designed for medium and high-power tractors. Swedish steel chassis frame and tines. 100 x 100 structural frame made from ST 52. The set of tines are mounted with two springs, one inside the other. The tine pressure is adjustable. ...

Working width: 3, 4, 5, 6, 7 m

... receive the seed. ESCUDERO’s seedbed preparers, for its features and design, are excellent equipment for to use in ploughed field of strong land and zones with strong frost. To use it helps to create of an incomparable ...

Working width: 1,500 mm - 1,800 mm

The innovative overhead frame concept combines on the one hand a truly free view of the cultivation equipment. Thanks to the ingenious 3-point attachment system, existing equipment which today is pulled by tractors can mostly be attached ...

The innovative overhead frame concept combines on the one hand a truly free view of the cultivation equipment. Thanks to the ingenious 3-point attachment system, existing equipment which today is pulled by tractors can mostly be attached ...

Working width: 3, 4, 5.2, 6 m

... 12 km/h. In addition, Laumetris Ltd. produces suspended Cultivators of 2 – 4 m. working length for less powerful tractors. Construction of this type cultivators are analogous to trailed cultivators.

Working width: 3.6 m - 9.2 m

Laumetris Ltd. produces trailed soil tillage implements - cultivators KLG of 3,6; 4; 5; 6; 7; 9; 12 m. width. Cultivator is used for accurate soil cultivation in order to seed sugar beets, linen, rape ...

Working width: 3.6, 4, 6, 8 m

Pre-sowing tillage aggregate Cultivator Laumetris Ltd. produces pre-sowing tillage machinery cultivators of 2 – 10 m. width. Cultivators are manufactured so that after one drive soil ...

Working width: 8 m
Working depth: 0 cm - 18 cm

... bearing units. Located on the disc backside Individual tine protection with cylindrical springs. Suitable to use on stony fields Compact size in transport position. Convenient for road transportation

Working width: 6, 8 m
Working depth: 0 cm - 8 cm

Six working zones. Intensive soil cultivation with full overlap Accurate and simple adjustment of working depth. Smooth and compacted sowing bed on required depth. Tine overload protection with a shear bolt

Working width: 8 m
Working depth: 0 cm - 18 cm

Based on multipurpose unit carrier. Convertible to disc harrow AN-8-BD and cultivator AN-8-PAV Additional support wheel. Accurate depth control Tine overload protection with a shear bolt Compact size ...

Working width: 2.1 m - 5.1 m
Working depth: 0 mm - 350 mm

Chisels and Semi chisels allow to make superficial works (5 to 15mm.deep) as well as deep works (30 to 35mm.deep) in compacted and stony soils. At the same time they mix the soil with stubble and prepare the best sowing, ready for ...

Working width: 3.3, 3.9, 4.5, 5.1 m
Working depth: 0 mm - 350 mm

The chisels and the semichisels allow to make superficial works (5 to 15mm.deep) as well as deep works (30 to 35mm.deep) in compacted and stony soils. The system with spring guarantees the proper adhesion to the soil in every moment ...

Working width: 3 m - 6 m
Working depth: 0 mm - 250 mm

... order to correctly work the whole surface. Frame clearance of 700mm. allows mixing of soil and its correct aeration. Cultivators are affective even in presence of important quantities of stubble. Roller works ...

The Buffalo Cultivator has to be tough. It was born over 30 years ago when Buffalo broke new ground with ridge till. It delivers the highest levels of quality, durability and performance of high-speed, high-residue conditions. Unequaled ...

In addition to the 6100 features, the Model 6140 also features: Spring cushion sweep shanks for rocky conditions Leaf-over-coil spring combination allows impact protection while maintaining proper operating position Adjustable foot ...

Working width: 18 in

In addition to the standard 6000 features, the Model 6200 also features: Large 18" cutting coulters with 12" depth bands slice through the high residue left by minimum till, no-till / ridge till high-bushel crops; Optional 20" coulter ...

Working width: 850 mm

... assemblies as once spring assembly fixed cannot be move or strain out of position. Swan Agro Heavy Duty Spring Loaded Cultivator is suitable for use in stone and root obstructed soil. It is used for loosening and ...

Working width: 850 mm

Brohawk: – We are the manufacturer, exporter, supplier, producer of Agriculture equipment -Spring loaded cultivator. Brohawk field cultivators are suitable in stone and root obstructed ...

Working width: 850 mm

Brohawk: – We are the manufacturer, exporter, supplier, producer of Agriculture equipment -Spring loaded cultivator. Brohawk field cultivators are suitable in stone and root obstructed ...

Working width: 890 mm

... Rigid shank cultivator. Rigid shank cultivators are also called as stiff shank cultivators. These cultivators are available in single row and double row cultivators. ...

Working width: 5'03", 6'09", 8'03"

The model 1000 cultivator is available in three popular sizes (5.25′, 6.75′, 8.25′). This Heavy-Duty version has been designed to do a proper job of cultivating tree lines, gardens, reclamation sites, etc. Standard equipment ...

Working width: 280, 330, 380 cm

Mechanical disc angle adjustment. Disc axle 40X40 mm, distance 240 mm. Adjustable heat treated scrapers, can be replaced separately.

Working width: 280, 330 cm

Subsoiler with mechanical depth adjustment. Mechanical front disc angle adjustment. Hydraulic closing of rear sections. Adjustable heat treated scrapers, replaceable.

Working width: 280 cm - 700 cm

Towing beam with articulated terminal. Dimensions of Central Monoframe: 200x200x10 (standard serie), 250x250x10 (strong serie), 250x250x12,5 (top serie). Wheels axel 60x60 mm (standar serie). Wheels axel 70x70 mm ( heavy serie). Wheels ...

Working width: 168 cm - 696 cm

... customer neccesity. Cultichisel size arm 25×25 mm, in two lines and interrows distance 24 cm, frame size 80×80. Special cultivator to work in finess labours and soil preparation for the sowing.

Working width: 2.16, 3, 3.5, 4.3, 5.13 m

To reduce production costs, GIL provides a mixer chisel in a single pass removes the residue mixed with the ground. It has arms to put bars with fins or chisel tines. Dus concave disks with jagged improves the mixing of waste and its ...

Working width: 180 cm - 750 cm

Chisel plough with size arm 40×40 mm, in two lines and interrows distance 30 cm, frame 100×100. Special for deep working.

Working width: 190, 240, 290, 340, 380 cm
Working depth: 15 cm

Used to prepare secondary tillage and seed bed. Pulling springs provide a secure ploughing of obstacles. The work width can be changed by adjusting holes on the frame. The lubrication system on the wrists provides longer life. There ...

Working width: 190, 240, 290, 340, 380 cm
Working depth: 18 cm - 24 cm

It isused forpost- harvest stubbleploughing and secondary soil tillage. Efficiently mix plant roots without overturning the soil. Thanks to pressure springs, it also provides safe plough in heavy soil conditions. It prevents soil ...