Mounted field cultivators

Working width: 2.2, 2.6, 3 m
Working depth: 85 cm

AKPIL is a family company located in Pilzno and established by Kazimierz Anioł in 1975. The company initially specialised in the craft production of construction products. In 1985, while seeking new areas for growth in order to cope with ...

Working width: 2.5, 3, 3.5 m
Working depth: 90 cm

AKPIL is a family company located in Pilzno and established by Kazimierz Anioł in 1975. The company initially specialised in the craft production of construction products. In 1985, while seeking new areas for growth in order to cope with ...

Working width: 2.1, 2.5, 2.8, 3 m
Working depth: 15 cm

AKPIL is a family company located in Pilzno and established by Kazimierz Anioł in 1975. The company initially specialised in the craft production of construction products. In 1985, while seeking new areas for growth in order to cope with ...

The cultivator mod.MD is suitable for working terrain as a primary working after autumn winter cereal, grass, chard or consenting a good mix of crop residue with the terrain, and their burial at a depth not superior to ...

The cultivator mod.MD is suitable for working terrain as a primary working after autumn winter cereal, grass, chard or consenting a good mix of crop residue with the terrain, and their burial at a depth not superior to ...

The Discn Harrow made of a series of smooth discs suitable for minimal working, shredding stubble and furthermore on terrain characterized by a certain clumpiness allows to obtain a relevant grade of refining.

Working width: 3,360, 1,400 mm

... power. Blocking valve that allows fixation of the width measurement of the cultivator. Interlayed blades. Allows no accumulation of grass in the arms of the cultivator. Joint bolts treated allowing ...

Working width: 1,400 mm - 2,860 mm

... fixation of the width measurement of the cultivator. Joint bolts treated allowing greater durability and prevent premature wear. Interlayed blades. Allows no accumulation of grass in the arms of the cultivator. Manufacturing ...

Working depth: 20 cm

We get a very flexible result on the field, because this machine combines two cultivation units in one. They also work independent from each other if needed. This is giving You flexibility in all kinds of conditions. The ...

Working width: 3, 4 m

... in presence of leftovers of cultivation. High working speed, minimum wear-and-tear and low fuel consumption. Mounted, half-mounted and trailed version. Accessories: • Difference from ...

Working width: 2.5, 2.8, 3, 4.1 m

Chisels with curved blades - Cage roller m. 2.55 Ø 460/600 - Cage roller m. 3.00 Ø 460/600 - Cage roller m. 3.20 Ø 460/600 - Cage roller m. 4.50 Ø 460/600 - Double row of corrugated disks m. 2.55 - Double row of corrugated disks ...

chisel with n° 3 rows of blades tipo Michel + row of corrugated disks + ring roller

Working width: 18'00", 20'00", 22'06", 25'00", 30'00"

The 812 Trailing Maxitill is designed for greater trash clearance. From the massive main beam that runs throughout the frame to the 65x65x6 box section, the 812 is built tough for New Zealand conditions. Floating contour wings allow ...

Working width: 4.26, 4.87, 5.5, 6.1 m

The 203 Centre Fold provides a choice of four models between sizes 4.26m to 6.1m. The independent contour following wings ensure undulation ground is covered. The vigorous vibrating action of the world famous 'S' tine makes a highly ...

Working width: 4'00" ft - 13'07"

The Rata 920 Maxi Till is simply famous for its rugged compact design, heavy flat bar crumblers and turnbuckle depth control. The world leading tines used on the 920 Maxi Till vibrate backwards, sideways and forwards at a constant ...

Working width: 3,000 mm

This cultivator has been specially designed for use in the front of the tractor to allow full-field cultivation and planting/sowing in a single pass. This saves both labour hours and fuel. Options include ...

Working width: 1,500, 7,150 mm

The Struik RF rigid-tine rotary cultivator can be used as either a full-field or row cultivator. The full-field configuration is prefect for planting bed preparation ...

Working width: 1,500 mm - 7,150 mm

The Struik RF rigid-tine full-field cultivator can be used as either a full-field or row cultivator. The full-field configuration is prefect for planting ...

Working width: 3, 4, 5.2, 6 m

... 12 km/h. In addition, Laumetris Ltd. produces suspended Cultivators of 2 – 4 m. working length for less powerful tractors. Construction of this type cultivators are analogous to trailed ...

Working width: 3.6, 4, 6, 8 m

Pre-sowing tillage aggregate Cultivator Laumetris Ltd. produces pre-sowing tillage machinery cultivators of 2 – 10 m. width. Cultivators are manufactured so that after one drive soil ...

The Buffalo Cultivator has to be tough. It was born over 30 years ago when Buffalo broke new ground with ridge till. It delivers the highest levels of quality, durability and performance of high-speed, high-residue conditions. Unequaled ...

In addition to the 6100 features, the Model 6140 also features: Spring cushion sweep shanks for rocky conditions Leaf-over-coil spring combination allows impact protection while maintaining proper operating position Adjustable foot ...

Working width: 18 in

In addition to the standard 6000 features, the Model 6200 also features: Large 18" cutting coulters with 12" depth bands slice through the high residue left by minimum till, no-till / ridge till high-bushel crops; Optional 20" coulter ...

Working width: 5'03", 6'09", 8'03"

The model 1000 cultivator is available in three popular sizes (5.25′, 6.75′, 8.25′). This Heavy-Duty version has been designed to do a proper job of cultivating tree lines, gardens, reclamation sites, etc. Standard equipment ...

Working width: 280, 330, 380 cm

Mechanical disc angle adjustment. Disc axle 40X40 mm, distance 240 mm. Adjustable heat treated scrapers, can be replaced separately.

Working width: 280, 330 cm

Subsoiler with mechanical depth adjustment. Mechanical front disc angle adjustment. Hydraulic closing of rear sections. Adjustable heat treated scrapers, replaceable.

Working width: 255, 300, 400, 500, 600 cm

Working width: 3, 5, 6 m
Working depth: 0 cm - 15 cm

... Double the ground coverage The SuperMaxx with 5 m working width requires the same amount of traction force as a 3-metre cultivator. Depending on the type of soil, 100 to 140 bhp is sufficient to run the machine. What ...

Working width: 130 cm - 400 cm
Working depth: 10 cm - 20 cm

Iron wheels for depth adjustment – RPF Rubber wheels for depth adjustment – RPG Manual sections tipping – RSL Hydraulic sections tipping – RSI Three rows frame (models with 11 or more shafts) Rear rollers on demand

Working width: 120, 160 cm
Working depth: 15 cm - 30 cm

Specify the kind of transmission required: wheel transmission for fertilizer spreading, or electric engine transmission for fertilizer spreading.

Working width: 130 cm - 220 cm
Working depth: 20 cm

Working width: 400, 250, 300 cm

... without mixing. The Topas can be rear-mounted or front-mounted and can be used in combination with a rotary harrow. Its short, compact design produces a strong centre of gravity. The 5 to 9 tines ...

Working width: 3, 3.5, 4, 5, 5.8 m
Working depth: 85 cm

Universal cultivator for almost all conditions Extremely manoeuvrable due to its compact design Possible with 3-point linkage Large selection of packers for optimal adaptation to the conditions of the site 3 – 6 m ...

Working width: 4, 5, 6 m

The TLG is a heavy-duty precision cultivator designed for the optimum preparation of seedbeds for sugar beet, potatoes and vegetables. The TLG consists of four working zones: the robust levelling board in the front, ...

Working width: 23'00" ft - 60'00"
Working depth: 127 mm

Level-Lift™ Field Cultivator Working widths from 23 ft, 6in. to 60 ft, 6 in. (7.2 to 18.4 m) Three- and five-section configurations Lattice-style frame design Hydraulically adjustable rolling baskets

Working width: 6.8 m - 18.3 m

Look to the Tiger-Mate 255 for the durability and Agronomic Design™ features you need to create a high-efficiency seedbed for more efficient planting and maximum yield.

Working width: 250 cm - 1,200 cm
Working depth: 10 cm

... double cage roller levels ridges and furrows left from tillage. Frame is light but extremely strong, up to 6 m mounted and up to 12 m pull type versions are available

Working width: 2.5, 3, 4, 5, 6 m
Working depth: 6 cm - 20 cm

These low draft and compact two-row cultivators are designed for lighter weight tractors with lower lifting capacity. The angle of the SYNKRO headstock is adjustable and this enables an ideal match to your tractor. This ...

Working width: 3, 3.5, 4 m

The CULTILINE XR is a mounted cultivation tool with two rows of notched discs. It is available in 3.00 m, 3.50 m and 4.00 m versions and it is characterised by its ability to work at speeds higher than 12 km/h. Only ...

Working width: 3,840 mm

The front cultivator is used for the planting of potatoes, to form perfect ridges without compaction by the tractor wheels. In order to reduce the number of passes by tractors over the soil, the front mounted ...

Working width: 2,080 mm - 3,008 mm
Working depth: 50 mm - 175 mm

... resist any distorting strains in toughest working condition such as cotton black soil field, banana, sugarcane and paddy field etc. The chassis which tines are mounted has holes for adjusting ...