Other pumps

Standard extent of supply - Pump directly flanged to IVECO-diesel engine and mounted on a 2-wheel trolley with 4 crank support and jack - integrated frame tank with mounted oil pan - Unit with detachable tow-bar and support wheel - Roof ...

Standard extent of supply - Pump directly flanged to a diesel engine and mounted on a 2-wheel trolley with 4 crank support and jack - integrated frame tank with mounted oil pan - Unit with detachable tow-bar and support wheel - Roof made ...

Standard extent of supply - Pump directly flanged to a diesel engine and mounted on a 2-wheel trolley with 4 crank support and jack - integrated frame tank with mounted oil pan - Unit with detachable tow-bar and support wheel - Roof made ...

Flow: 5,000 l/min
Pressure: 200, 150 bar

Filling a tanker equipped with a pump crane is easy and fast – the entire process can be handled without ever leaving the tractor. The pump cranes can be mounted on all Livakka slurry tanker models. The right model for each use can surely ...

Flow: 12,000 l/min
Pressure: 200 bar

6″ side-mounted pump crane is mounted on the right side of tanker by plate fitting. Side-mounted pump cranewidth= Filling on the right side of the tanker. Extension 3,5 m from the ground surface down. Pump output 12 000 ...

Flow: 20,000 l/min
Pressure: 200 bar

Centre-mounted pump crane allows to fill on both sides of the tanker. The boom structure has a lower centre of gravity, while the telescopic arm offers user-friendly operation and a smaller footprint for transport. These features make ...

Flow: 10 m³/h - 130 m³/h

SPECIFICATION: - Turbine drive, the patented "Turbimec" system, interchangeable for flows of 10 to 130 m³/hr. - Structure shot-blasted just before the application of an epoxy anticorrosive primer. A top coat of polyurethane paint ...

Flow: 10 m³/h - 130 m³/h

SPECIFICATION: - Turbine drive, the patented "Turbimec" system, interchangeable for flows of 10 to 130 m³/hr. - Structure shot-blasted just before the application of an epoxy anticorrosive primer. A top coat of polyurethane paint ...

Flow: 10 m³/h - 130 m³/h

SPECIFICATION: - Turbine drive, the patented "Turbimec" system, interchangeable for flows of 10 to 130 m³/hr. - Structure shot-blasted just before the application of an epoxy anticorrosive primer. A top coat of polyurethane paint ...

Power: 0.75 kW - 1.1 kW
Flow: 26 m³/h

Our wide range of chopper pumps for manure/slurry is famous worldwide thanks to its high quality construction and absolute reliability. View our range of chopper pumps designed for livestock slurry, manure, biogas and civil, agricultural, ...

Power: 7.5 kW - 11 kW
Flow: 110 m³/h

Our wide range of chopper pumps for manure/slurry is famous worldwide thanks to its high quality construction and absolute reliability. View our range of chopper pumps designed for livestock slurry, manure, biogas and civil, agricultural, ...

Power: 2.2 kW - 18.5 kW
Flow: 160 m³/h

Our wide range of chopper pumps for manure/slurry is famous worldwide thanks to its high quality construction and absolute reliability. View our range of chopper pumps designed for livestock slurry, manure, biogas and civil, agricultural, ...

Flow: 50 l/min - 250 l/min

The stainless steel centrifugal milk pump ensures swift removal of milk from the receiver to the tank. The pump includes a built-in non-return valve, high quality seal for longer service life and stainless steel impellor. The system ...

Flow: 1,000, 1,500, 1,600, 2,200, 3,300 l/min
Pressure: 50,000 Pa

About the ATL Vane Vacuum Pump The vacuum pump is one of the most important parts in a milking system. ATL supplies several sizes of vane pumps to suit different milking parlours. Vane pumps are oil-lubricated and are V-belt driven ...

Flow: 1,600 l/min - 6,000 l/min
Pressure: 50,000 Pa

About the ATL Lobe Vacuum Pump The vacuum pump is one of the most important parts in a milking system. ATL supplies several sizes of lobe pumps to suit different milking parlours. The lobe pumps are designed to be both heavy duty ...

Flow: 280 l/min

-Vacuum pump capacity is 280 liters/minute -Motor power 1 HP -Vacuum tank is 30 liters -Built-in vacuum gauge -Integrated vacuum valve -Large side cover for easy access to the interior of the vacuum tank -1'' pipe vacuum supply -Can ...

No milking machine can function properly, if you do not have a reliable vacuum pump. SYLCO HELLAS has a complete line of pumps starting from the smallest dry type pumps, up to special inverter controlled pumps. The reliability and commitment ...

The new KNS 250D is the entry level vacuum pump. It is a closed dry vane pump couples with a 1 HP electric motor. It is redesigned to be more efficient with less noise. It delivers the necessary vacuum with no needed maintenance. It is ...

The Dairymaster centrifugal milk pump has been engineered with the latest technology, materials and design. It has a multiple curved blade impeller which has a number of advantages. High performance efficient pumping across a range of ...

Flow: 5,000 l/min

ORCAN pumpunit PU100 Farm-line SCHOUTEN orcan pumpunit to feed the Schouten Drag-hose system. This pumpunit is equiped with a Doda AFI35HD centrifugalpump for pumping the slurry to the injector and a vacuumpump for starting up. ...

Flow: 5,000 l/min

ORCAN pumpunit PU300 Profi-line SCHOUTEN orcan pumpunit to feed the Schouten Drag-hose system. The Orcan PU300 Profi-line pumpunit is equiped with a Doda AFI35HD centrifugalpump for pumping the slurry to the injector and a Vogelsan ...

Flow: 5,000, 11,137 l/min

DEAL Pumpwagon PW Profi-line The Ideal pumpwagon is a mobile pump unit which fulfills all needs for the drag-hose technique. The tank has a double compartment, a buffer function with ample capacity to pump slurry around and enough ...

Power: 2.2 kW - 55 kW
Flow: 0.2 m³/h - 400 m³/h
Pressure: 3 bar - 200 bar

Power: 2.5 kW - 119 kW
Flow: 324 m³/h - 540 m³/h
Pressure: 10, 12.6 bar

Flow: 70 m³/h - 140 m³/h
Pressure: 3, 5 bar

It is a portable type manure pump which can be driven by a tractor or electrical motor equipped with a special rubber rotor. It can pump high dry matter containing manure and liquids up to 5 bars. Type Drive type ...

Power: 1.5, 0.75 kW

LSP stainless steel milk pumps are designed for elasticity to adapt for different installation needs on the field. The housing can be reversed for possibility of installation on both sides of thereceiver tank. Due to precise machining ...

Power: 18, 14 ch
Flow: 120, 160, 200 l/min

CHARACTERISTICS -Spheroidal cast iron hood, interior lamp mechanization. -Crankshaft forged and stamped in hardened and grinding steel. -Piston with anti-friction material and stainless steel guide. -Connecting rod injected with ...

Power: 9 ch
Flow: 90 l/min

CHARACTERISTICS -Spheroidal cast iron hood, interior lamp mechanization. -Crankshaft forged and stamped in hardened and grinding steel. -Piston with anti-friction material and stainless steel guide. -Connecting rod injected with ...

Power: 4, 5, 6 ch
Flow: 50, 60, 80 l/min

CHARACTERISTICS -Spheroidal cast iron hood, interior lamp mechanization. -Crankshaft forged and stamped in hardened and grinding steel. -Piston with anti-friction material and stainless steel guide. -Connecting rod injected with ...

DESCRIPCIÓN Hydraulic dosing pumps use the water flow and / or the pressure difference in the conduction to make the contribution of fertilizers to the irrigation network without electrical elements. They present different levels of ...

Power: 5.5 kW
Pressure: 5.5 bar

Piston Pump LJM’s piston pump is suitable for animal housings where the slurry needs to be pumped efficiently over longer distances. •Pumps the manure effectively over long distances •The ideal solution for pumping thick liquid slurry •Low ...

Power: 1.5 kW - 18.5 kW

Lind Jensen submersible pumps •Quality pumps with proven long-lasting durability •Minimal maintenance and long service intervals means low operating costs •Mechanical shaft seal •Built-in leakage and thermal control •Effective ...

Power: 5.5 kW - 18.5 kW

Lind Jensen dry mounted pumps •Quality pumps with proven long-lasting durability •Minimal maintenance and long service intervals means low operating costs •Built-in thermal control •Built-in cutting plate that finely cuts and feed ...

Flow: 100 l/min - 1,200 l/min

STANDARD EQUIPMENT (single-cylinder): two tyre galvanized frame with manual handle to move the motor pump, standard engine drive and hand starting, suction and delivery flanges on the pump.

Power: 25 ch - 51 ch
Flow: 400 l/min - 2,400 l/min

STANDARD EQUIPMENT (2-4 cylinders): two tyre frame with incorporated fuel tank of 70 lt. staker legs, standard electric starting with battery, switchboard and suction and delivery flanges on the pump.

Flow: 660 l/min - 14,000 l/min

STANDARD STANDARD: two-tyre chassis with incorporated fuel-tank, staker legs, standard electric starting with battery, engine protective panel (in case of oil low-pressure, engine overheating, drive belt break, water pressure fall) pressostat, ...

Power: 4 kW
Flow: 25 m³/h

The Greengear LPG Water Pumps easily remove water from a flooded basement or drain your fish pond. Use it to pump water to boat docks and out of duck blinds. Aluminium Body Sturdy aluminium body of the Water pump allows for long term ...

Power: 6 kW
Flow: 70 m³/h

The Greengear LPG Water Pumps easily remove water from a flooded basement or drain your fish pond. Use it to pump water to boat docks and out of duck blinds. Aluminium Body Sturdy aluminium body of the Water pump allows for long term ...

Power: 27 kW
Flow: 31 m³/h - 96 m³/h

Code: 5419680 ENGINE: LOMBARDINI DIESEL 11 LD 626.3 Suction mouth: 80 mm. Mouth drive: 65 mm. Height (m.c.a.): 125 – 10 Flow rate: 31 – 96 m³ / H. Impellers: 2 de 204 mm. Weight: 235 kg. Starter: electric start Dimensions: 1170 ...

Power: 21 kW
Flow: 60 m³/h - 130 m³/h

Code: 5419660 ENGINE: LOMBARDINI DIESEL 9 LD 625.2 Bouche d’aspiration:100 mm. Lecteur de bouche: 80 mm. Hauteur (m.c.a.): 60 – 30 Débit: 60 – 130 m³ / H. Roue à aubes: 1 de 204 mm. Weight: 161 kg. Starter: electric start Dimensions: ...

Power: 15 ch
Flow: 10 m³/h - 78 m³/h

Code: 5419640 ENGINE: LOMBARDINI DIESEL 4 LD 820 Pump: LP 90 / 9 – 239 Suction mouth: DN 65 Mouth drive: DN 65 Height (m.c.a.): 76 – 10 Flow rate:10 – 78 m³ / H Impellers: 1 – 230 mm. Weight: 150 kg. Starter: electric start Dimensions: ...

Power: 1, 2 kW
Flow: 0.8, 1.1, 2.5 m³/min

The AB-series is a propeller pump having a characteristic of low head but large discharge volumes. For the low head applications, the use of AB pump is more advantageous in power saving than the use of centrifugal pumps.

Power: 127 kW

The SSP-GS-series is a submersible axial-flow pump designed to be installed in a discharge column. The pump offers an efficient and a high volume pumping at a low head application. It features, easy to install and to remove, taking less ...

Power: 4 kW

Tsurumi engine pumps feature a heavy-duty, compact and easy-to-use design. Made with excellent materials, these engine pumps can withstand the harsh conditions of construction sites and elsewhere, offering top-class durability and reliability. ...

A wide choice of models to meet the requirements in agriculture and general industry. Pumps from the best manufacturers coupled to diesel engines of national or international manufacturers. Construction on mobile two-wheel trolleys with ...

Flow: 200 m³/h

Can deal with thick matter up to 8% dry matter Supply head height up to 20 mWS Pumps and chops Unsusceptible to foreign bodies Very low maintenance costs Very low lifecycle costs Range of operation modes The ...

Flow: 320 m³/h

Can deal with thick matter up to 12% dry matter Supply head height up to 45 mWS Resistant to clogging by straw and feed residues Pumps and chops Very high cutting effectiveness Unsusceptible to foreign bodies ...

Flow: 180 l/min

Technical Specifications - Electric motor : Single phase - Power (Kw) : 0,75 - Frequency (Hz) : 50 - Voltage (V) : 220 - Vacuum tank(lt) : 18 L - Regulator : Spring - Vacuum gauge : Ø 63 mm, 0-760 mmhg

Flow: 350 l/min

Technical Specifications - Electric motor : Single phase - Power (Kw) : 1,1 - Frequency (Hz) : 50 - Voltage (V) : 220 - Vacuum tank(lt) : 30 L - Regulator : Servo Yuvac 3500 - Vacuum gauge : Ø 100 mm, 0-760 mmhg

Flow: 600 l/min

Technical Specifications - Electric motor : Single phase - Power (Kw) : 2,2 - Frequency (Hz) : 50 - Voltage (V) : 220 - Vacuum tank(lt) : 45 L - Regulator : Servo Yuvac 3500 - Vacuum gauge : Ø 100 mm, 0-760 mm Hg

Flow: 5 l/min - 375 l/min

ELECTRIC SUBMERSIBLE PUMPS CASED VERSION 4” (SERIES 95 PR N/) >The submersible pumps series 95 PR N/ are the smallest in the wide range of submersible pumps produced by PANELLI and sumarize 40 years experience in hydraulics. The patented ...

Flow: 60 l/min - 1,100 l/min

ELECTRIC SUBMERSIBLE PUMPS CASED VERSION 6” (SERIES 140 PR N) >The submersible pumps serie 140 PR N,in the range of 6’’ submersible pumps,are unique in the world to have a floating impeller with front shim adjustement.This innovative ...

Flow: 80 l/min - 600 l/min

ELECTRIC SUBMERSIBLE PUMPS CASED VERSION 6” (SERIES 140 PX) >The submersible pumps serie 140 PX are completely in Stainless Steel AISI 304 and are unique in the world for the impellers with front shim adjustement fully floating and released ...

Flow: 4,000 l/min - 8,000 l/min

MOTORPUMP SET with the following equipment: • Air cooled or water cooled engine • Engine protection device • Diesel engine electric wiring • Horizontal centrifugal pump with counterflanges on suction and delivery ...

DIESEL POWER PACKS with the following equipment: • Air cooled or water cooled engines • Engine protection device • Engine electric wiring • Dead centre industrial clutch suitable for long disengages and complete ...

Flow: 600 l/min - 1,650 l/min

ELECTRIC PUMPS FOR IRRIGATION AND INDUSTRIAL APPLICATIONS

Flow: 70, 90 l/min

Diesel dispenser 70 FM /100 FM -with transponder technology -rotary vane pump with a delivery rate of 70 l/min or 90 l/min -set up for 120 users -diesel dispensing amounts can be preset -option of inputting vehicle registration number ...

Flow: 30 l/min

Details Electric pump 12 V, approx. 30 l/min effective, 4 m connecting cable with terminals, 6 m hose, delivery nozzle.

Details Hand pumps -robust construction -no energy source required -low-cost -2 connector -suction tube can be shortened as required