Single-axle slurry tanker P53

tandem axlevacuumpressure

BAUER pump tankers in steel con­struc­tion can hold up to 24,000 litres trans­port volume. We use only cer­ti­fied top-quality steel plate of renown steel fac­to­ries. The tanks are rolled, joined and finally auto­mat­i­cal­ly welded in diam­e­ters of 1100 mm — 2000 mm on our own pro­duc­tion lines. All com­po­nents such as tanks, anti-surge baffles, frames and draw­bars are cal­cu­lat­ed and approved accord­ing to the strict Aus­tri­an guidelines. ■All com­po­nents such as vacuum-/pres­sure tanks, anti-surge baffles, frames and draw­bars are cal­cu­lat­ed and approved accord­ing to the strict Aus­tri­an guidelines. ■The stan­dard hot-dip gal­va­niza­tion accord­ing to DIN EN ISO 1461 ensures long-term cor­ro­sion protection. ■The high-gloss gal­va­niza­tion with the typical “zinc flower” gives our tankers an amazing appear­ance. In order to pre­serve the appear­ance over many years, all gal­va­nized tankers are fin­ished with a special passivation. ULTRA­FAST High Per­for­mance due to Large Strip Width Bauer pump tankers stand out due to fast filling, high spread­ing pres­sure and sturdy pumps. The high-quality stan­dard equip­ment is com­ple­ment­ed by a com­pre­hen­sive range of accessories. EXACT Quan­ti­ty Control of Appli­ca­tion Rate With the Bauer pump tanker, it is pos­si­ble to reg­u­late the appli­ca­tion rate via the 3‑way valve, the pump speed and the driving speed. The appli­ca­tion rate can be reg­u­lat­ed by adjust­ing the 3‑way valve. High spread­ing pres­sure of the pump tanker guar­an­tees large strip widths and a uniform slurry distribution.