Cattle trough 1120258

steelinteriorexterior

New : Polyurethane outter paint. - Manufactured from 2 mm sheet steel bent in a single length for greater rigidity, - Angles are notched allowing the ends to be superimposed with a weld bead for more solidity, - Anti-rust protection on the entire trough, - Polyurethane paint applied on pan interior and exterior, - Very deep trough pan, - Base smaller than trough width. Standard feed troughs are fitted with: - 2 reinforcing cross bars inside the feed trough, - 4 feet welded under the tray for troughs up to 5 m and 6 feet for 6 m. Feet connected by reinforcing cross bars. - Anti-spillage rim’s width of : • 75 mm for any troughs width from 0.80 to 1.50 m • 55 mm for troughs width 0.60 m, - Ø 50 mm galvanised legs for any troughs width from 0.80 to 1.50 m and Ø 42.4 for any troughs width 0.60 m. Adjustable in height in groups of 7 cm by a through bolt to adjust the height or tilt the trough to limit waste, - 1 PVC threaded drain through wall plug (Ø 45 mm). They are intended for cattle for feed and silage. Polyurethane paint coating applied on pan exterior. Bituminous coating applied on pan interior.