Milk pump controller iNTELPUMP

digital

iNTELPUMP is designed to sense the level of milk in the receiving can via a stainless steel float and then cycle the milk pump contactor according to the level. iNTELPUMP can be customized to individual installations by adjusting the internal timers and can be configured with different settings for wash and milk. Additional features such as the ability to pump out the receiving can at the end of milking as it waits for milk to settle in the delivery line. Then, using the milk purge valve, injects filtered compressed air in the milk delivery line to push it out to the bulk milk tank. Key Features •Programmable pump timers, can be customized •Different settings for wash & milk •Controls the “Milk Purge Valve” •Controls the “Milk / Wash” sequence •Controlled “Off” sequence •“Remote Pump Out” switch capable Additional Feature When networked with an iNTELSTART the system can be programmed to switch the plate heat exchanger pump or solenoid valve on and off at the same time as the milk pump during milking, thereby reducing water usage. The iNTELSTART will also turn the water off automatically during the wash cycle, eliminating the risk of accidental cooling of hot wash water. System Features Run On Time :1- 60 seconds Pump Out Time :1-30 seconds Milk / Wash Delay :1-60 seconds Milk Clear Time :1-60 seconds Injector On Time :1-60 seconds Actuator Cycle Time :1-60 seconds Actuator On Time :1-30 seconds Pump Off Delay :1-120 seconds Network :Yes, automatic initiation of milk, wash and off modes.