Water flow meter Hidrowoltmann

turbineirrigation

HIDROWOLTMANN Woltmann tipe water meter for irrigation and hydraulic public domain with m̃ approval. HIDROWOLTMANN water meter includes a pulse output pre-equipment. Intallation conditions U10-U0/D0. Ratio accuracy R50. Hidrowoltmann water meters ranges from DN 50 to DN 400*. Woltmann water meter. The operation of Woltmann water meters is based on the use of a turbine, with a shaft located in the water flow line. The Hidrowoltmann meter has been designed for hydrodynamic compensation, preventing external pressure on the turbine’s shaft. Pre-installation for the pulse emitter. It reads the meter’s accumulated volume, without having to take the reading on-site. The Hidrowoltmann meter is supplied from the factory with the pulse emitter pre-installed, so you do not need to remove the meter to install it. Gauges ranging from 50 to 300 mm. There is a wide range of Hidrowoltmann water meters, with gauges ranging from 2” to 12”, which can be adapted to any installation, irrigation or distribution network, regardless of the pipe size; all of the diameters offered by Hidroconta are covered by warranty. Easy-to-read totaliser with vacuum-sealed clockwork. Hidroconta’s Hidrowoltmann water meter has a very easy-to-read dial, which displays the following information: the 7-digit volume totaliser drum (m3), rotating star, which detects leakages in the installation, corresponding certification of passing the standard tests for use with irrigation water and public hydraulic domain systems, sensitivity, metrology class, etc. The entire clockwork assembly is prepared to prevent the condensation of water, which could cause humidity in the unit and, therefore, its deterioration.