Mounted salt spreader HF series

electrictractor-mountedfor roads

Product overview
Salt spreader HF series (Hf-1.5RX, HF-4RX, HF-6RX) for winter road maintenance; designed to store, convey and evenly distribute snow-melting agents over road surfaces. Configurable hopper capacities and corrosion-resistant construction allow adaptation to different vehicle classes and operating ranges.

Structural composition

• Storage: corrosion-resistant hopper available in capacities 1.5 m³, 4 m³, 6 m³.
• Conveyance: screw conveyors or conveyor belts transfer material from hopper to spreader; screws provide metering, belts suit larger particles or low-flow materials.
• Spreading device: single high-speed rotating disc driven by PTO or motor; spreading width and application rate are adjustable (typical 2–8 m).

Advantages

• High work rate: rapidly treats large road sections compared with manual spreading, suitable for emergency winter response.
• Labor saving and operator safety: can be operated by one or a few operators from the vehicle cab, reducing exposure to severe weather.

Technical parameters
Salt Spreader Technical Parameter

• Models: Hf-1.5RX / HF-4RX / HF-6RX.
• Hopper capacity: 1.5 m³ / 4 m³ / 6 m³.
• Supporting power: 12 hp (listed models).
• Spreading width: 2–8 m (typical).
• Overall dimensions (examples): Hf-1.5RX: 2710×1200×1380 mm; HF-4RX: 3619×1680×2118/1575 mm; HF-6RX: 5140×2200×2400 mm.
• Spreading device: single disc.
• Max. load capacity: 3000 kg / 8000 kg / 12000 kg.
• Battery (where listed): 12V 80Ah (HF-4RX).
• Salt conveyance method: chain scraper push.
• Motor: BM2-80 (for HF-4RX as listed).

Precautions for use
1. Preparation before operation

• Vehicle check: verify tires, brakes, lights and power system (fuel/oil/coolant for ICE or battery/charging for electric) to ensure safe operation in winter conditions.
• Spreader check: ensure hopper integrity, conveyors operate normally and rotating parts move freely.
• Material preparation: select appropriate snow-melting agent for ambient temperature and road type; remove clumps and large impurities before loading.
• Environmental assessment: evaluate road width, traffic and weather to set suitable spreading width and rate; adjust for wind and temperature to avoid drift.

2. Key points during operation

• Driving safety: comply with traffic regulations, use warning signs and lights; maintain stable driving on icy roads and avoid sudden braking or sharp turns. Typical operating speed about 10–30 km/h depending on conditions.

3. Maintenance and upkeep after operation

• Cleaning: rinse hopper, chassis and spreading device after use to remove corrosive residues; dry thoroughly to prevent corrosion.
• Storage: keep remaining agent in a dry ventilated place; label with product and remaining quantity.

Characteristics / technical specifications

• Series: HF (Hf-1.5RX, HF-4RX, HF-6RX).
• Hopper options: 1.5 / 4 / 6 m³.
• Supporting power: 12 hp.
• Spreading width: 2–8 m (adjustable).
• Spreading device: single disc.
• Salt conveyance: chain scraper push.