Mounted salt spreader

for roads

<b>Product overview</b><br>The 6 m³ vehicle-mounted salt spreader is engineered for winter road maintenance and deicing operations. It integrates a large-capacity hopper, a chain-slat conveying system and a disc-type spreading device to ensure continuous and adjustable material distribution.<br><br><b>Key features and advantages</b><br><ul><li>6 m³ hopper capacity for extended operation between reloads.</li><li>Chain-slat conveying system to move granular deicing materials reliably when gravity feed is insufficient.</li><li>Disc-type spreading device for even lateral distribution across the roadway.</li><li>Adjustable spreading width 2–8 m to match different road cross-sections and operating conditions.</li><li>Vehicle-mounted configuration for integration with winter maintenance fleets.</li><li>Independent diesel power: 12 HP diesel engine (Youpu) with manual throttle control.</li></ul><br><br><b>Primary dimensions and capacities</b><br>Overall dimensions: 4220 × 1676 × 1775 mm<br>Hopper dimensions: 3000 × 1676 × 1775 mm<br>Hopper volume: 6 m³<br>Maximum load capacity: 8000 kg<br>Spreading width: 2–8 m<br><br><b>Technical specifications</b><br><ul><li>Product type: Vehicle-mounted salt/deicing agent spreader</li><li>Power: 12 HP diesel engine (Youpu)</li><li>Overall dimensions: 4220 × 1676 × 1775 mm</li><li>Hopper dimensions: 3000 × 1676 × 1775 mm</li><li>Hopper volume: 6 m³</li><li>Maximum load capacity: 8000 kg</li><li>Spreading device type: Disc type</li><li>Material conveying system: Chain-slat conveyor</li><li>Spreading width: 2–8 m</li><li>Mounting type: Vehicle-mounted</li><li>Throttle control: Manual throttle</li><li>Battery: 12 V 80 AH ×1</li><li>Motor: BM2-80</li></ul><br><br><b>Applications</b><br><ul><li>Winter road maintenance and deicing</li><li>Urban and municipal streets</li><li>Industrial and facility access roads</li><li>High-traffic corridors requiring continuous material delivery</li></ul><br><br><b>Applicable materials</b><br><ul><li>Granular snow-melting agents and rock salt compatible with chain-slat conveying and disc spreading</li></ul><br><br><b>Operation instructions and safety notes</b><br><ul><li>Pre-operation inspection: verify carrier vehicle, power source, hopper, conveying system and spreading disc for proper function and absence of blockage.</li><li>Material preparation: avoid wet, caked or contaminated materials that may clog the conveyor or spreader.</li><li>Road and weather assessment: set spreading width and application rate according to road width, traffic, slope and wind conditions.</li><li>Operating safety: drive cautiously on icy surfaces; avoid abrupt braking and sharp turns; use safety signals during spreading.</li><li>Spreading operation: monitor material flow and stop the system before clearing blockages.</li><li>Wind precautions: reduce spreading width or adjust application when wind causes drift or uneven distribution.</li></ul><br><br><b>Maintenance recommendations</b><br><ul><li>Empty hopper and remove residual material after use.</li><li>Wash body, chassis and spreading components with clean water to remove corrosive salts.</li><li>Dry components to minimize corrosion risk.</li><li>Inspect chain-slat conveyor and spreading disc for wear, blockage or restricted movement.</li><li>Service diesel engine, battery and drive components at recommended intervals.</li><li>Store unused deicing material in a dry, ventilated place to prevent caking.</li><li>Keep the spreader in a dry, ventilated storage area when not in use.</li></ul><br><br><b>Specifications</b><br><ul><li>Product type: Vehicle-mounted salt/deicing agent spreader</li><li>Hopper volume: 6 m³</li><li>Power: 12 HP diesel engine (Youpu)</li><li>Overall dimensions: 4220 × 1676 × 1775 mm</li><li>Hopper dimensions: 3000 × 1676 × 1775 mm</li><li>Maximum load capacity: 8000 kg</li><li>Spreading device type: Disc type</li><li>Material conveying system: Chain-slat conveyor</li><li>Spreading width: 2–8 m</li><li>Mounting type: Vehicle-mounted</li><li>Throttle control: Manual throttle</li><li>Battery: 12 V 80 AH ×1</li><li>Motor: BM2-80</li></ul>