Mounted straw spreader 2VR

for round balesfor square bales

Overview
Spread-a-Bale is a bale spreading attachment engineered for fast, low-dust bedding of livestock housing and sheds. It self-loads bales from the stack or the floor and handles both round and square bales. Once attached, the machine spreads a full bale in under one minute while requiring only 55 litres/minute of hydraulic oil flow. The design excludes electrics and focuses on low maintenance and low running costs for reliable daily operation.

The Twin Vertical Rotor (2VR) is one of three configurable head variations (2VR, HR and ST). The Twin Vertical Rotor (2VR) spreads straw in a fanned pattern a distance of 6 - 9 metres / 20 - 30ft.

The Twin Vertical Rotor (2VR), like all Spread-a-Bale machines, comes in a variety of body sizes to suit your loader's lift capacity and the bales sizes that you use. We offer two body ranges: Lite Range and M-Range. Our Lite Range is designed for 1 to 1.5 tonne tractor loaders, skid steers and Hoff loaders. Our M-Range is our traditional range for 1.7 to 3 tonne telescopic and industrial loaders.

This machine can be side-mounted or end-mounted to suit your shed configuration.

Key benefits

• Up to 50% straw saving
• Up to 75% labour saving
• Minimal dust generation for improved animal and operator health
• Compatible with round and square bales
• Self-loading, therefore operates with a single loader
• Quick and simple attachment/detachment

Optional Extras
M-Range machines can be offered the following extras:

• Galvanised body
• Hardox wear plate
• HD Motors for a 19% increase in torque
• High flow manifold and pipes for a 27% increase in performance and efficiency

All machines are end-mounted as standard to discharge straw out in front. However, both Lite and M-Range machines can be side-mounted to allow side discharge.