Thanks to its design and manufacturing quality, the empty weight of the Trans-Space agricultural tipping trailers is significantly reduced and therefore allows to transport still higher payloads. Combined to a JOSKIN running gear, they are ideal for intensive transport.
Concept The Trans-SPACE are made of a floor sheet in HARDOX and two side sheets (four on the Trans-SPACE 8000) in high tensile steel. The underside of the Trans-SPACE is meant for the most constraining works: two opposing stringers support the body with unmatched stability. The first rather big one links both side reinforcements to each other while the other is placed at the level of the anchoring point of the hydraulic tipping ram.
Hitching The "girder" drawbar was tested to withstand the highest loads and intensive works.
Tipping The tipping system is standard oil fed. There is an option that makes it possible to replace it by a hydraulic pump, which may be fitted with a hydraulic or electric lowering control.
Door: tight and safe
Door: tight and safe Monocoque tipping trailers are fitted with very resistant synthetic rubber seals all around the body. The door is kept closed by a side locking device (except on vehicles with drop sides).
This system allows a perfect tightness of the JOSKIN tipping trailers, even with small grains.
The doors of the JOSKIN tipping trailers are fitted with two safety devices:
- In order to prevent system damage, a pressure relief valve regulates the oil pressure if the door cannot be completely closed, e.g. due to an obstacle;
- A pilot operated valve on each door ram holds the door in position if hydraulic hoses break or if the tractor stops.