Mounted disc harrow DHX-600

5-sectionwith hydraulic adjustmentdepth control

Professional producers require equipment that can manage increased straw and chaff loads post-harvest, increase water penetration, quicken soil warming and promote weed seed germination for a proper pre-seed burn-off operation. DHX-600 high speed tillage unit does all that with its double row of wavy coulters and five bar heavy harrow. The coulters engage the ground sizing the straw and mixing the chaff within the top layer of soil. The heavy harrow evenly distributes, levels and breaks up residue that is discharged by the coulters. The DHX-600 Disc Harrow is the is the evolution of the heavy harrow, the next level of performance for post harvest and pre-seeding. We have recently added the option of a Valmar Fertilizer Kit for the DHX-600. - The DHX’s two rows of 18” eight wave coulters on 8” spacing followed by five bars of 5/8” x 26” heavy harrow tines allows it to efficiently chop straw, mix residue with the ground all while spreading and levelling. - The coulters are mounted to a four-bolt service free hub and a specially designed shank. The hub is completely rebuild-able to help reduce service costs and down time. The rubber torsion shank has been designed for long life and ground following. - The harrow tine coils are designed to get larger towards the outside of the tine to reduce stress during field operation. All harrows are controlled hydraulically for on the go adjustment. The down pressure on the harrow section can be easily adjusted with two large tension springs. - There is a single point depth control for the discs mounted at the rear of the machine. Simply move the adjustment along the slide to set your disc depth.