Mounted disc harrow DHX-360

3-sectionwith hydraulic adjustment

- The DHX’s two rows of 18” eight wave coulters on 8” spacing followed by five bars of 5/8” x 26” heavy harrow tines allows it to efficiently chop straw, mix residue with the ground all while spreading and levelling. - The coulters are mounted to a four-bolt service free hub and a specially designed shank. The hub is completely rebuild-able to help reduce service costs and down time. The rubber torsion shank has been designed for long life and ground following. - The harrow tine coils are designed to get larger towards the outside of the tine to reduce stress during field operation. All harrows are controlled hydraulically for on the go adjustment. The down pressure on the harrow section can be easily adjusted with two large tension springs. - There is a single point depth control for the discs mounted at the rear of the machine. Simply move the adjustment along the slide to set your disc depth. - The main frame of the DHX is made from 12” x 12” 3/8” thick tubing making the machine robust and providing the necessary weight to make the disks extremely effective. The wing frames have been designed to carry almost an additional 3,000 lbs of water which adds an extra 30 lbs force to each disk for increased penetration if needed. - The wing knuckle is made from 2” plate and uses 2.5” diameter Nitrided pins and MLG fibre bushings making it service free.