Rear-mount mower Cutter 2940 FPV

front-mountdrumslope

Overview
The perfect cut is the foundation of quality forage. Fendt Cutter drum mowers deliver consistent cutting performance across varying conditions, combining proven drum technology with practical design details for easy field operation and maintenance.

Key features

• Drum concept with four drums: low ground pressure and careful sward handling; drums distribute weight evenly and are suitable for heavy conditions.
• Pairs of drums produce two clean swathes for efficient pick-up.
• Elastic V-belt drive with automatic tensioning for uniform power transmission and overload protection.
• Spiral bevel gears with Gleason teeth for smooth operation, reduced noise and lower fuel consumption.
• Square stainless-steel frame with U-profile reinforcement for long service life.
• Laterally fitted inspection holes for quick maintenance access.
• FPV: front-mounting with swing linkage for flexible swath width adjustment and manual cutting height setting.
• TL: rear mounting with centre suspension and patented TurboLift system for a floating cut and optimal sward protection.
• Adjustable swath width via central lever; optional additional swath discs available for narrower formation.
• Good accessibility for maintenance: top-opening guards with gas springs, quick knife change with special tool, optional hydraulic side guards for field switching.
• Transport position for safe road travel; designed for operation on slopes (specified slope capability per model).

Fendt Cutter FPV (Front-mounting with swing linkage) - Models and table
Cutter 2940 FPV | Cutter 3140 FPV | Cutter 3340 FPV
Working width (m): 2.86 | 3.06 | 3.26
Cutting drums (Number): 4 | 4 | 4
Blades per cutting drum (Number): 3 | 3 | 3

Fendt Cutter TL (Rear mounting with centre suspension) - Model and table
Cutter 310 TL
Working width (m): 3.06
Cutting drums (Number): 4
Blades per cutting drum (Number): 3

Operation & maintenance

• Swath width adjustment: central lever allows quick adjustment of swath width (standard approx. 1.2–1.75 m depending on model); optional additional swath discs enable narrower swath widths (approx. 0.65–1.4 m depending on model).
• Cutting height: on front-pendulum machines, infinitely adjustable from approx. 45–73 mm by turning the wear-resistant skid plate; a practical tool is stored on the machine.
• Automatic hub centring enhances road safety.
• Integrated toolbox, spring-loaded impact guard and optional equipment improve usability and protection.

Available variants / Models (as presented)

• Cutter 2940 FPV
• Cutter 3140 FPV
• Cutter 3340 FPV
• Cutter 310 TL

Technical specifications

• Series / Commercial name: Fendt Cutter
• Mounting types: Front-mounting (FPV) with swing linkage; Rear mounting with centre suspension (TL)
• Working width examples: 2.86 m (Cutter 2940 FPV), 3.06 m (Cutter 3140 FPV / Cutter 310 TL), 3.26 m (Cutter 3340 FPV)
• Cutting drums: 4 (all shown models)
• Blades per cutting drum: 3 (all shown models)
• Swath width adjustment: standard approx. 1.2–1.75 m; optional additional swath discs for approx. 0.65–1.4 m (model-dependent)
• Cutting height adjustment (front pendulum block): approx. 45–73 mm (infinitely adjustable via skid plate)
• Drive: Elastic V-belt drive with automatic tensioning
• Gearing: Spiral bevel gears with Gleason teeth for smooth running
• Construction: Square stainless-steel frame, reinforced mower mount with U-profile
• Maintenance: Laterally fitted inspection holes; top-opening guards with gas springs; quick knife change with special tool
• TurboLift (TL models): stepless contact pressure adjustment, on-the-move calibration, compensation cylinder for stability
• Mobility & transport: transport position folding to 90°; designed for safe road travel; high slope capability (model-dependent)