Horizontal agitator OPTIMIX 2G 90-65

submersibleelectrically-poweredeasy to install

• Propeller in hardened steel, optional galvanized, ss304 or ss316
• Mechanical seal of SiC/SiC
• Seperated oil chambers for motor, gear and bearing housing
• Longlife-oil within the gear and bearing housing
• Guide mast support with 4 rollers for 100 x 100 / 120 x120 / 150 x 150 mm masts
• Galvanically isolated to the mast through ss316-rope (V4A)
• The cable is restistant against biomass


Operating depth:
The streamlined design ensures better heat dissipation and allows for use in temperatures up to 55°C.


Regarding flow maintenance:
Due to the slow speed and the large impeller diameter, this agitator is mainly used to maintain the flow.


Gearbox:
The robust planetary gear has its own oil circuit with turbine oil and an oil change interval of 12,000 operating hours.


Galvanic isolation:
Special slide bars and slide rollers prevent direct contact with the guide mast and thus guarantee galvanic isolation. The ss316 rope is also galvanically isolated from the submersible motor agitator via a separate bushing.


Reliable mixing:
In our suspension devices, the electric cable is routed behind the square mast using cable clamps to prevent it from getting caught in the mixing blades and to ensure reliable mixing.


Agitator blades:
The agitator blades are XT 1400 three-bladed agitator blades and are available in galvanised steel, stainless steel or surface-hardened for use with different substrates.