Horizontal agitator GIANTMIX FT

verticalelectrically-poweredstainless steel

• Low-noise spur gear • Bearing housing with mechanical seal of SiC/SiC • Tube Ø 159 mm, ss304 or ss316 / wall thickness 5 mm • Tube lengths from 4.0 / 5.0 / 5.5 / 6.0 m • Sealing plates in 3 sizes in ss304 (V2A) or ss316 (V4A) • Sealing membrane EPDM 60 • Oil expansion vessel for lubrication and monitoring of the seal • Suitable up to 8 m beneath substrate level. Deeper depths on request • Horizontally and vertically inclination adjustment of ± 30° • Propeller diameters from 660 to 880 mm in ss304 (V2A) stainless or hardened steel • Hydraulic inclination (optional cylinder support upwards) • Stainless steel rain covers optional • POM protection to minimize abrasion • Giantmix FT HY only with PTO drive and without motor possible Adjustment options: The agitator is the only agitator worldwide that can be adjusted ± 30° horizontally and vertically. A high-quality hydraulic unit and a hand spindle are supplied as standard for this purpose. Depth of use: Due to the unique sealing system, an installation depth of up to 8 m below the filling level and a full swivelling range are possible. The flexible pipe penetration is sealed with two EPDM sealing membranes (inside and outside) with a ball in between. Deeper installation depths are also possible on request. Optional tractor drive: The GIANTMIX FT can be driven by a tractor with an optional protective device. All GIANTMIX FT mixers are also available without a motor and only with a PTO connection as FT HY.