Mixing wagons

... counter-rotating steel auger along the entire length of the mixer; -high mixing accuracy (1:100 000); -very good mixing quality, including small amounts; -low wear; -short mixing ...

Capacity: 0.8 m³

... mastery of coarse and concentrate feed mixing. Strong enough to overcome any obstacle, effective enough to make animals happy. Mixing has never been this fun... Height, which is the disadvantage of ...

Capacity: 2.7 m³

Charger V2.7 L 2.7m3 capacity or 950-1100kg vertical feed mixer Power input: PTO Best suited for small scale dairy farmers

Capacity: 2.7 m³

Charger V2.7 LE 2.7m3 capacity or 950-1100kg vertical feed mixer Dual power PTO and 220v electric motor Best suited for small scale dairy farmers

Capacity: 16 m³

... We have started to produce feed mixer wagons in 1996. We are located Afyon province and serve the farmers in all around the world. We have been exporting our feed mixer ...

Capacity: 4 m³

... We have started to produce feed mixer wagons in 1996. We are located Afyon province and serve the farmers in all around the world. We have been exporting our feed mixer ...

Capacity: 4 m³

... We have started to produce feed mixer wagons in 1996. We are located Afyon province and serve the farmers in all around the world. We have been exporting our feed mixer ...

Capacity: 12 m³

... kg Wagon Width:1,90 m Wagon Height:2,00 m Wagon Length:4.00 m Total Width:2,25 m Total Height:2,72 m Total Length:6,25 m Min.Tractor Power Required:80 Hp Min. Shaft Devolution ...

Capacity: 2.5 m³

... Weight - Wagon Width - Wagon Height - Wagon Length - Total Width:1,49 m Total Height:1,72 m Total Length:3,55 m Min.Tractor Power Required:40 Hp Min. Shaft Devolution Required:540 ...

Capacity: 4 m³

... 1740 kg Wagon Width:1.42 m Wagon Height:1.37 m Wagon Length:2.57 m Total Width:1.80 m Total Height:1.90 m Total Length:4.65 m Min.Tractor Power Required:40 Hp Min. Shaft Devolution ...

Capacity: 12, 13, 14 m³

... standard the mixer wagon is equipped with a lateral chute (18m) it can be equipped with a swivelling chute (15 m right / 13 m left) or the SMART chute (distribution along the tractor / machine coupling ...

Capacity: 11, 12, 13 m³

... height and a perfect manoeuvrability, the mixer feeders are fitted with a vertical stepped auger that brews and aerates the mixture; they can feed about 55 to 80 dairy cows per pass. The rolled tank of the mixer ...

Capacity: 12 m³ - 24 m³

... self-propelled mixers reliable and easy, these self-propelled wagons are adapted to a daily use and have been developed for individuals. Autospire PERFORMANCE – self-propelled mixers ...

Technicial Specifications - Length - 5000 mm Width - 2200 mm Height - 2900 mm Hopper Length - 2880 mm Hopper Width - 2000 mm Hopper Height - 1950 mm Scoop - 5000 mm Empty Weight - 3140 kg Helix Revolution - 34,40 rpm Movement ...

Technicial Specifications - Length - 1650 mm Width - 1350 mm Height - 1500 mm Hopper Length - 1600 mm Hopper Width - 1200 mm Hopper Height - 1000 mm Empty Weight - 500 kg Helix Revolution - 52,25 d/dk Movement Type - Gearbox Number ...

Capacity: 2 m³

Technicial Specifications - Length - 2150 mm Width - 1350 mm Height - 1750 mm Hopper Length - 1700 mm Hopper Width - 1200 mm Hopper Height - 1100 mm Scoop - - mm Empty Weight - 685 kg Helix Revolution - 52,25 rpm Movement ...

Capacity: 14 m³

Suited to medium-small companies that want to change over from the trailed mixer wagon to a self-propelled mixer wagon: simple design and easy to use but with high quality ...

Capacity: 11 m³

- Line for medium to small-sized companies - The ideal machine to make the switch from trailed to self-propelled

Capacity: 14 m³

Suited to medium-small companies that want to change over from the trailed mixer wagon to a self-propelled mixer wagon: simple design and easy to use but with high quality ...

Capacity: 8 m³

... the productivity and profitability of farmers and enterprises. Our fixed and mobile feed mixers are specially designed for users. Our fixed and mobile feed mixers ...

Capacity: 2 m³ - 8 m³

... the productivity and profitability of farmers and enterprises. Our fixed and mobile feed mixers are specially designed for users. Our fixed and mobile feed mixers ...

Capacity: 2 m³

For cattle and sheep farms with a maximum number of animals of around 25-30, our feed mixing machine 2m3 model, will bring the meat and milk production to an excellent level. The machine has the ability to be used in ...

Capacity: 24, 26 m³

The duplo vertical mixer is based on a tapered conical shape with two conical vertical augers enables any product to be chopped or mixed. For larger capacities, the height of the single vertical mixers ...

Capacity: 7, 10, 13 m³

Our trailed horizontal mixer has a mixing and chopping system that has evolved over the years to achieve optimum performance. Operating basically on a central axis on which two hollow spirals are mounted ...

Capacity: 25 m³

Our trailed horizontal mixer has a mixing and chopping system that has evolved over the years to achieve optimum performance. Operating basically on a central axis on which two hollow spirals are mounted ...

Capacity: 18 m³

... fibers. The six rugged mixing arms produce a thorough tumbling action, while the rubber wipers ensure complete clean-out of the tub. The spiralled rotor carries feed into the two highcapacity augers, providing perfect ...

Capacity: 15.2, 17.8, 10.6, 12.2 m³

... availableTungsten carbide coated auger knives Heavy-duty independent trailer ULTRA RESISTANT Augers made of abrasion résistant Steel HEAVYDUTY TRAILER The V-Max is welded on a heavy-duty trailer ...

Capacity: 6.5 m³ - 20 m³

The fastest and most effective TMR mixer on the market. The V-Mix can cut and mix a wide variety of products including large round bales, square, baleage or dry. The Valmetal TMR V-Mix is versatile enough to handle ...

Ares serie uses one vertical auger with boron-steel knives mixing system. The auger’s transmission is driven by epicyclic reduction gear. This machine has been studied to work with whole round or squared bales adding ...

Ares serie uses two vertical augers with boron-steel knives mixing system. The augers’ transmission is driven by epicyclic reduction gears. This machine has been studied to work with whole round or squared bales adding ...

Ares serie uses one vertical auger with boron-steel knives mixing system. The auger’s transmission is driven by epicyclic reduction gear. This machine has been studied to work with whole round or squared bales adding ...

Capacity: 5 m³ - 33 m³

Samurai 7 unifeed trailed mixing wagons without tiller Available in 14 models from 5 to 33 m³ ● Series 400: 5 m³ ● Series 450: 7 – 9 – 11 m³ ● Series 500: 11 – 13 – 15 -17 m³ ● Series 600: 18 – ...

Capacity: 7 m³ - 23 m³

Samurai 7 unifeed mixing wagon horizontal with tiller Available in modelli with capacity from 7 to 23 m³ Series 450: 7 – 9- 11 m³ Series 500: 11 – 13 – 15 – 17 m³ Series 600: 18 -219- 23 m³ STANDARD ...

Capacity: 5 m³ - 30 m³

STANDARD EQUIPMENT N° 2 high strength steel chopping-mixing augers LH side direct discharge, without conveyor Set-up for second discharge side Hydraulic couplings to tractor with “pull-push” levers distributor Epicycloidal ...

Capacity: 236.6, 7.9 ft³

A brand new vertical mixer for your Total Mixed Ration. A further improved design and a “Plug&Play” conception. One single unit, all-in and ready to use! This new mixer is compact, efficient and energy-saving. WANT ...

Capacity: 353 ft³ - 432 ft³

... new vertical mixer for your Total Mixed Ration. A further improved design and a “Plug&Play” conception. Innovation and performance through a direct drive motorization. One single unit, all-in and ready to use! This ...

Capacity: 18.4, 19.8, 14.2, 17 m³

... first to the last beast! Choosing the right vertical mixer for your Total Mixed Ration is crucial! Mixing capacity adapted to the herd size, efficient knives that respect the fibre, optimized mixing ...

The range of mixers with 1 vertical auger and a right/left conveyor is available from 8 to 14 m³ either with a narrow (NC) or a wide (C) tank. The side conveyor enables a fast and accurate distribution under all conditions. Right/left ...

The mixers with 2 vertical augers are available with a narrow (ND° or wide (D) tank from 16 to 24 m³. The direct discharge enables a fast distribution to the right and/or to the left hand side.

Capacity: 8 m³ - 20 m³

.Manual counter-knives .Supplementary frame with inspection platform .Mechanical support foot .Hitch bar with regulation of height .Hydraulic by quick connection to the tractor's hydraulics .Single wheels

Capacity: 10 m³ - 30 m³

.Hydraulic counter-knives .Supplementary frame with inspection platform .Hydraulic support foot .Hitch bar with regulation of height .Containment ring .Independent hydraulic system .Single wheels or double wheels

Capacity: 3 m³ - 14 m³

.Manual counter-knives .Frame welded to the mixing tank and inspection ladder .Mechanical support foot .Hitch bar with regulation of height .Without electronic weighing system(option HL15 with 3 load cells) .Hydraulic ...

Capacity: 0.8 m³

Make sure that your animals get all the nutrition they need ! *The milk yield per animal increases (depending on animal race) around 1,5 to 2 L *Effective for 8-12 animals *Easy to use *Efficient cutting and hashing operation *Can ...

Capacity: 1.5 m³

Make sure that your animals get all the nutrition they need ! *The milk yield per animal increases (depending on animal race) around 1,5 to 2 L *Effective for 25-30 animals *Easy to use *Efficient cutting and hashing operation *Can ...

Capacity: 1.5 m³

Make sure that your animals get all the nutrition they need ! *The milk yield per animal increases (depending on animal race) around 1,5 to 2 L *Effective for 25-30 animals *Easy to use *Efficient cutting and hashing operation *Can ...

Capacity: 8 m³

PELICAN 8M3 Pelican is designed for a homogenous mixture. It is produced according to the needs of all kinds of operators as 4m3, 6m3, 8m3, 10m3 with its stur¬dy and robust structure. The optional double side draining band allows the ...

Capacity: 6 m³

PELICAN 6M3 Pelican is designed for a homogenous mixture. It is produced according to the needs of all kinds of operators as 4m3, 6m3, 8m3, 10m3 with its stur¬dy and robust structure. The optional double side draining band allows the ...

Capacity: 4 m³

PELICAN 4M3 Pelican is designed for a homogenous mixture. It is produced according to the needs of all kinds of operators as 4m3, 6m3, 8m3, 10m3 with its stur¬dy and robust structure. The optional double side draining band allows the ...

Capacity: 1 m³

Capacity: 2, 3 m³

Capacity: 2 m³

Capacity: 9.9 m³

If you are looking for a vertical feed mixer that will easily feed up to 100 head and do it as economical as possible, the NDE 1402 is the mixer for you. It features 1/4 inch tub walls ...

Capacity: 15 m³

... ft. tub, (with rubber top kit) this mixer is an excellent choice if you are looking for a mixer that will handle 5 x 6 round bales and still have plenty of room for silage or other by-products. This ...

Capacity: 17.6 m³

... large volume and superior performance over most mixers in its class. It is available with a 58” front door or LH, RH or double side door. The NDE 804 has truly become a “workhorse” in the vertical mixer market.

Capacity: 8 m³ - 20 m³

Top quality and long experience in the field of “Unifeed” feeding have been a perfect union to produce a range of simple and versatile machines. The “Patriot” series in the versions with 1 screw feeder is the result of a long period ...

Capacity: 18 m³ - 40 m³

The version with two and three screws is the optimum solution for companies that want to combine fast work with best quality of the product obtained.

Capacity: 8 m³ - 22 m³

... metallographic checks to which all parts are subjected, guarantee absolute reliability and long-life. The four cutting and mixing screws prepare perfectly and quickly products with different specific weight and granulometry.